Saturday,23,February,2019,09:17:33:00006
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64
VCDS Version: 18.2.0.3 (x64)
Data version: 20180212 DS287.0
www.Ross-Tech.com
VIN: MEXJ1760XJT075118 License Plate: 88
Mileage: 18080km-11234mi Repair Order:
Chassis Type: 60-VW25 (7E0)
Scan: 01 03 04 08 09 10 15 17 19 25 44 56
VIN: MEXJ1760XJT075118 Mileage: 18080km-11234miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CWXC) Labels: None
Part No SW: 03L 906 023 RS HW: 03L 907 425 B
Component: R4 1.5l TDI H33 9977
Revision: --H33--- Serial number:
Coding: 00110116032500080000
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_ECM15TDI02103L906023RS 001002
ROD: EV_ECM15TDI02103L906023QT.rod
VCID: 081F2E22B3333D0450-805C
No fault code found.
Readiness: 0 0 0 0 0
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: None
Part No SW: 6R0 907 379 CA HW: 6R0 907 379 AQ
Component: ABS9.0 front H01 0004
Serial number: --------------
Coding: 60DD2F63212A04C50615F46A845920020000
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_Brake1ABS90BOSCH 003017
ROD: EV_Brake1ABS90BOSCH_VW25.rod
VCID: 7F0DB5FEE6FD7ABC61-802A
No fault code found.
-------------------------------------------------------------------------------
Address 04: Steering Angle (G085) Labels:* 6R0-959-654.clb
Part No SW: 6R0 959 654 HW: 6R0 959 654
Component: LENKW.SENSOR H07 0070
Serial number: 03111813470922
Coding: 01
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_LWSKLOVW25X 005001
ROD: EV_LWSKLOVW25X.rod
VCID: 7EF348FAE1F773B46A-802A
1 Fault Found:
1140738 - Steering angle sensor
B1168 54 [009] - Missing Calibration / Basic Setting
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 5
Mileage: 18085 km
Date: 2015.06.03
Time: 21:03:42
Voltage terminal 15: 13.30 V
Voltage terminal 30: 13.85 V
Terminal 15 status: On
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels: 6R0-907-044.clb
Part No SW: 6R0 907 044 Q HW: 6R0 907 044 Q
Component: Climatronic H12 0615
Revision: V0000000
VCID: 4189F306D889CC4C57-8014
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 7E0-937-BCM-V1.clb
Part No SW: 7E0 937 090 D HW: 7E0 937 090 D
Component: BCM PQ25 Max4 H82 0762
Revision: B9082001 Serial number: 8601 222180856
Coding: 3A904BFF48A10000013806407CEB96904980630F608C2141220000030000
Shop #: WSC 12345 123 12345
VCID: 2C57B2B24F0B312494-8078
Subsystem 1 - Part No: 5K7 955 559 C Labels: 5K7-955-559.CLB
Component: RLS 290617 04 42 0106
Coding: 0714DD
Subsystem 2 - Part No SW: 6R0 959 802 EF HW: 6R0 959 802 EF Labels: 6R0-959-802.CLB
Component: J386__TSG_FT 023 2521
Serial number: 13202848170704050535
Coding: 350000
Subsystem 3 - Part No SW: 6R0 959 801 ED HW: 6R0 959 801 ED Labels: 6R0-959-801.CLB
Component: J387__TSG_BT 023 2521
Serial number: 13102849170705002249
Coding: 040000
Subsystem 4 - Part No SW: 6C0 959 442 HW: 6C0 959 442
Component: E221__MFL-TAT H06 0023
Serial number: 1811713320101504AB1B
Coding: 240000
Subsystem 5 - Part No SW: 6R0 959 811 S HW: 6R0 959 811 S
Component: J388__TSG_HL 022 1522
Serial number: 13102728170704212031
Coding: 000000
Subsystem 6 - Part No SW: 6R0 959 812 S HW: 6R0 959 812 S
Component: J389__TSG_HR 022 1522
Serial number: 13102729170630002341
Coding: 000000
3 Faults Found:
00901 - Back-Up Lamps
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 4
Mileage: 18081 km
Time Indication: 0
Date: 2015.06.03
Time: 20:13:11
02745 - Bulb for Daytime Running Light; Left
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 4
Mileage: 18081 km
Time Indication: 0
Date: 2015.06.02
Time: 20:26:19
02746 - Bulb for Daytime Running Light; Right
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 4
Mileage: 18081 km
Time Indication: 0
Date: 2015.06.02
Time: 20:26:19
-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446) Labels:| 7E0-919-475.clb
Part No SW: 7E0 919 475 K HW: 7N0 919 475
Component: PARKHILFE 8K H06 0106
Revision: -------- Serial number: 28231325304021
Coding: 308002
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_VW75XParkAssis4K 001004
ROD: EV_VW75XParkAssis4K_001.rod
VCID: 3A7B84EABD5F9F9416-806E
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 5K0-959-655.clb
Part No SW: 6R0 959 655 J HW: 6R0 959 655 J
Component: VW10AirbagU06 H10 0020
Revision: -------- Serial number: 003GW01BGFS-
Coding: 003036
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
ROD: EV_AirbaVW10BPAVW250.rod
VCID: 4999EB26E8B9040C8F-801C
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1
Part No SW: 6RF 920 862 B HW: 6RF 920 862 B
Component: KOMBI H01 0217
Serial number: 00000000000000
Coding: 1208000000
Shop #: WSC 00000 000 08192
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A05729
ROD: EV_Kombi_UDS_VDD_RM09_005_VW25.rod
VCID: 4B95D12EE2C5161CBD-801E
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:. 7E0-909-901.clb
Part No SW: 7E0 909 901 HW: 7E0 937 090 D
Component: GW-K-CAN TP20 H82 0762
Revision: B9082001
Coding: 002300
Shop #: WSC 12345 123 12345
VCID: 68DF0EA29B73DD04B0-803C
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H01 0217
Serial number:
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09.rod
VCID: 6ADB74AA8D7FEF14A6-803E
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist (J500) Labels:| 1Sx-909-144-44.clb
Part No SW: 1S2 909 144 P HW: 1S2 909 144 P
Component: EPS_ECU H61 1702
Coding: 0001000000000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_SteerAssisNSK 014008
ROD: EV_SteerAssisNSK_014.rod
VCID: 4189F306D089CC4C57-8014
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio (J503) Labels: None
Part No SW: 6RF 035 187 C HW: 6RF 035 187 C
Component: Radio 557 5515
Revision: -------- Serial number: VWZ7Z2R8103103
Coding: 0E000440000010
Shop #: WSC 12345 123 08192
VCID: 4999EB26E0B9040C8F-801C
No fault code found.
End-------------------------(Elapsed Time: 02:26)--------------------------
here are the images,
Thanks for the report and the images.
---
I will send you the new wire that I told you previously to solve this issue of the reversing light.
All you have to do is install it and the problems are over, regardless BCM coding.
---
clue
The same but at address 03.
In the right dialog box you can do a search by the steering ring angle.
Re: BCM Max upgrade in Vento IND manual transmission
Posted: Sat Feb 23, 2019 6:14 am
by ciclo
Nikhil wrote: Sat Feb 23, 2019 6:03 am
T73b/48 is input signal to Bcm for Backup light from gear selector. It dosent give any output to reverse light.
Wrong. It depends on the type of BCM.
Please do not waste my time. I'm looking forward to finishing this installation. Thanks.
Re: BCM Max upgrade in Vento IND manual transmission
Posted: Sat Feb 23, 2019 6:29 am
by Nikhil
It true that disabling Backup lamp diagnostics is not working in 090D Bcm.
Now remaing option is to give output to the Backup Lamp from T73b/12, like its present in automatic transmissions.
I respect your experience with wiring diagrams. But diagnosing Lamp by input signal given from a gear shifter it dosent sound correct to me.
Just trying to help sakthi to solve the error in his car with basic diagnostics procedures we use.
God knows how BCM gone know backup lamp is working
or not without its being connected to BCM.
No one is wasting your time here. The comments i do also read by other users. Not mandatory to give reply to my comments. Its FORUM.
Re: BCM Max upgrade in Vento IND manual transmission
Posted: Sat Feb 23, 2019 7:24 am
by ciclo
He already has the best possible help. He doesn't need the help from someone who is monetarily benefiting from the knowledge extracted from the FORUMS..
Re: BCM Max upgrade in Vento IND manual transmission
Posted: Sat Feb 23, 2019 8:45 am
by ciclo
7,5m
Sakthi, I'll send it on Monday (absolutely free) and only the masters of the universe will know when it'll arrive to your address. (15-30 days, SP-IND)
Re: BCM Max upgrade in Vento IND manual transmission
Posted: Sat Feb 23, 2019 11:53 am
by Nikhil
ciclo wrote: Sat Feb 23, 2019 7:24 am
He already has the best possible help. He doesn't need the help from someone who is monetarily benefiting from the knowledge extracted from the FORUMS..
Just to cover up your mistake that you forgot to send wiring for backup lamp adatpation you were trying to disable Backup lamp diagnostics via coding and mentioned that its not really needed to put new wire for Backup lamp. You know it very well that wire is needed so you sent it with other kits for manual transmission cars in past.
I am laughing on floor that still you post that non Bcm max gives output in mt cars to reverse lamp from T73b/48. Its input signal in non bcm max and bcm max. If we remove and isolate T73b/48 bcm wont understand that car is in reverse gear. Even in diagram you have posted, you can see the switch at gear shifter which giving input to T73b/48. Tell more lies to cover up your mistake. This one is not enough.
Its not your thread to tell someone to offer help or not. Have some sense to accept your mistake rather than blaming other things. Everyone do mistakes. I wish you had said same thing to hmthakur, when i offered him help to give the terminal pins which was sent wrong by you.
Don't wan talk more. Everyone knows about your great attitude. Please dont waste you precious time for replying to my comment. And if you dont want me to comment in these thread, please start your own forum which will allow only two people to write in thread.
I accept i leaned a lot from the knowledge you have shared on forum. Thanks for it.
Re: BCM Max upgrade in Vento IND manual transmission
None of these PQ25 vehicles (BCM Max adaptation) have the new wire for the reverse light installed. (VCDS = no fault code found)
Ask Sakthi or whoever you want who forces their authors to create these threads. None of them will tell you that they were created by their own will.
You're being ridiculous at its maximum expression, slightly retarded if you haven't understood the diagram, and you seem somewhat resentful because of my words related to monetary issues.
Re: BCM Max upgrade in Vento IND manual transmission
Sakthi, I'll send it on Monday (absolutely free) and only the masters of the universe will know when it'll arrive to your address. (15-30 days, SP-IND)
Ciclo, Can you add a cloth tape and the pin terminal removal tool with this?
Also it will be great if you can few BCM pins of different sizes? for my future upgrades any.
Re: BCM Max upgrade in Vento IND manual transmission
Posted: Sat Feb 23, 2019 5:58 pm
by peter_dk25
ciclo wrote: Sat Feb 23, 2019 4:31 pmThe great satisfaction of absolute truth
None of these PQ25 vehicles (BCM Max adaptation) have the new wire for the reverse light installed. (VCDS = no fault code found)
Ask Sakthi or whoever you want who forces their authors to create these threads. None of them will tell you that they were created by their own will.
You're being ridiculous at its maximum expression, slightly retarded if you haven't understood the diagram, and you seem somewhat resentful because of my words related to monetary issues.
Fernando: I think that you are to good for this discussion - do not waste your time on such behavior
Re: BCM Max upgrade in Vento IND manual transmission
Posted: Sun Feb 24, 2019 3:14 am
by ciclo
sshakthi123 wrote: Sat Feb 23, 2019 5:20 pm
Ciclo, Can you add a cloth tape and the pin terminal removal tool with this?
Also it will be great if you can few BCM pins of different sizes? for my future upgrades any.
I can't do it, I made the shipment yesterday.
I send you the tracking number by email so you can verify that it's absolutely true. so sorry.
Re: BCM Max upgrade in Vento IND manual transmission
Posted: Sun Feb 24, 2019 3:19 am
by ciclo
peter_dk25 wrote: Sat Feb 23, 2019 5:58 pm
Fernando: I think that you are to good for this discussion - do not waste your time on such behavior
Sure Peter, absolutely agree. Many thanks for your advice.
I could have banned him, but even if I don't like what this user writes, I can't deny the right to other users to read what he writes ...
---
An example of how signals can be manipulated.
Magnifico...ooo....ooo...ooo...ooo.ooo.oo.
Re: BCM Max upgrade in Vento IND manual transmission
Posted: Mon Feb 25, 2019 11:02 am
by sshakthi123
ciclo wrote: Sun Feb 24, 2019 3:14 am
I can't do it, I made the shipment yesterday.
I send you the tracking number by email so you can verify that it's absolutely true. so sorry.
Okay
Re: BCM Max upgrade in Polo Sedan (Vento in india) manual highline
Posted: Mon Feb 25, 2019 11:47 am
by sshakthi123
sshakthi123 wrote: Thu Feb 21, 2019 1:47 pm
1. ignition on -> windows down -> locked the car -> pour water immediately -> and it rolled up the windows
2. ignition on -> windows down -> DIDN't LOCK the car -> pour water immediately -> and it rolled up the windows
3. followed same procedure of #1 and #2 but pour the water after 5 to 10 mins -> THIS DIDN'T ROLL THE WINDOWS
Ciclo, I would really like to get the rain closing (point 3 above) working. I checked with other users (antardaksh and govindsharma) and they have it working.
here is an update on my observation,
lets say windows are down and car is locked. On pouring the water after sometime (after 15 mins) it has NO action. BUT but as soon as pouring the water, if we press car LOCK button then the windows are ROLLING UP. So my guess is the rain sensor is not connected with +30 (OR direct positive) hence it is not working.
Please provide me your expertise help fixing this.
---
edited by ciclo
Re: BCM Max upgrade in Vento IND manual transmission
Posted: Mon Feb 25, 2019 1:03 pm
by iichel
Rain sensor is (from factory) connected to +30 (permanent 12v)
Re: BCM Max upgrade in Vento IND manual transmission
Posted: Mon Feb 25, 2019 1:05 pm
by sshakthi123
iichel wrote: Mon Feb 25, 2019 1:03 pm
Rain sensor is (from factory) connected to +30 (permanent 12v)
Thanks iichel, any guess what would be the issue then? how can we fix this.
so sorry.
