Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Sat Apr 09, 2022 4:55 pm
hello can you give me some info about interior mirros switch? is this genuine volkswagen or aftermarket? thanks in advance
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://www.uk-polos.net/
iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Page 57 of 72
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Sat Apr 09, 2022 6:31 pm
Do you mean the adjustment switch for the exterior mirrors? It is original VW, from the Polo 6C.
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Tue Apr 12, 2022 8:56 pm
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Sat Apr 16, 2022 9:09 am
Hi,
Iichel,
We are converting CLNA 1.6 tdi 105 hp manual to 1.6 TDI dsg.
There is no CLNA or any other 105 hp polo with 1.6 tdi dsg.
So i need to flash CAYB firmware. I will change power class in the cluster to match CAYB firmware.
Car have normal key start. Will it start considering all immo data is correct?
Or do we need to change something in starting system for dsg cars?
Any input
Iichel,
We are converting CLNA 1.6 tdi 105 hp manual to 1.6 TDI dsg.
There is no CLNA or any other 105 hp polo with 1.6 tdi dsg.
So i need to flash CAYB firmware. I will change power class in the cluster to match CAYB firmware.
Car have normal key start. Will it start considering all immo data is correct?
Or do we need to change something in starting system for dsg cars?
Any input
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Sat Apr 16, 2022 9:18 am
I think it should be ok. Firmware does not have the immo data. Only eeprom. So I think it will work but you never know....
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Mon Apr 18, 2022 8:17 am
what about audi a1 firmware?
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Mon Apr 18, 2022 9:24 am
It's the same only cayc instead of cayb
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Mon Apr 25, 2022 7:11 pm
Hi, how is the coding for power folding mirrors via the key when locking. Thanks for the help
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Mon Apr 25, 2022 7:20 pm
On PQ25, mirrors can only unfold with ignition on.
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Wed May 18, 2022 1:06 pm
How is the coding for folding mirrors?
I see thats possible by locking the car
I see thats possible by locking the car
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Wed May 18, 2022 1:23 pm
you can check the autoscan in my first post for all codings of all modules
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Wed May 18, 2022 4:42 pm
Yes i have activate Byte 3 Bit 7
Left Door Coding is 0200A3
Right Door Coding is 1000AB
What is missing?
Left Door Coding is 0200A3
Right Door Coding is 1000AB
What is missing?
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Wed May 18, 2022 4:55 pm
Perhaps a full scan would be nice to start with.
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Wed May 18, 2022 5:00 pm
I dont have VCDS i only have OBD 11
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Tue May 24, 2022 10:35 am
More info --> viewtopic.php?p=529277&hilit=stalks#p529277
Preparing a 2Q0 stalk (Polo AW) for conversion to PQ25 (modifications to PCB of cruise control switch and intermittent potentiometer)
This customer will transform from the 6R0 steering column to the Audi A1 steering column with:
- Steering column and coupling from Audi A1 8X pre-facelift (passive steering column)
- 2Q0 stalks with T16 and T10 connector for stalks 5C0 971 975 and 5C0 971 974
- 6C0 slip ring with T16 connector for MFSW/Airbag 1K0 972 928
- 6C0 mount for steering column
- 6RA ignition lock with T7 connector 6RA 971 975
- 6C0 covers for steering column
- 7E0... F mirror with covers, T8 connector and 5K7 RLHS for HBA and auto lights (3G0 858 548 A 9B9 + 6C0 868 438 9B9 + 6C0 868 168 A 9B9 + 8K0 971 833)
- all
Preparing a 2Q0 stalk (Polo AW) for conversion to PQ25 (modifications to PCB of cruise control switch and intermittent potentiometer)
This customer will transform from the 6R0 steering column to the Audi A1 steering column with:
- Steering column and coupling from Audi A1 8X pre-facelift (passive steering column)
- 2Q0 stalks with T16 and T10 connector for stalks 5C0 971 975 and 5C0 971 974
- 6C0 slip ring with T16 connector for MFSW/Airbag 1K0 972 928
- 6C0 mount for steering column
- 6RA ignition lock with T7 connector 6RA 971 975
- 6C0 covers for steering column
- 7E0... F mirror with covers, T8 connector and 5K7 RLHS for HBA and auto lights (3G0 858 548 A 9B9 + 6C0 868 438 9B9 + 6C0 868 168 A 9B9 + 8K0 971 833)
- all