Fog Lights
Posted: Thu Mar 10, 2005 9:10 pm
Just finished fitting my fog lights, got them from GSF. They're well easy to fit although it did have it moments.
The plastic lugs which go through the holes in the bumper are very tight fitting, I suggest putting the screw through them first to get a bit of pliability (is that even a word) into them as well as a thread.
Needle nose pliars are useful as the lugs are still tight after you thread them and they need to be held until there'about 5mm of thread left on the screw. The top screw is tricky to get hold of, dont know what to suggest for that.
Pictures will follow shortly.
The plastic lugs which go through the holes in the bumper are very tight fitting, I suggest putting the screw through them first to get a bit of pliability (is that even a word) into them as well as a thread.
Needle nose pliars are useful as the lugs are still tight after you thread them and they need to be held until there'about 5mm of thread left on the screw. The top screw is tricky to get hold of, dont know what to suggest for that.
Pictures will follow shortly.