Page 1 of 1

back box for 1.0L

Posted: Mon Apr 18, 2005 10:21 pm
by polo_mf
im lookn for a back box to give the car a nice sound!
like the upswept DTM letter box(??????) one!

where can u recommend i get one (preferably cheap) and will this have to be changed if i eventually get a 16v rear bumper?????

cheers

Posted: Tue Apr 19, 2005 4:33 pm
by polo_mf
anyone :?:

Posted: Tue Apr 19, 2005 5:09 pm
by david burton
try to get one on ebay, a good a place as any

as for the 16v bumper, you will have to be careful if you don't want to change the exhaust once you change the bumper. the 16v sticks further out at the bottom of the bumper (rather than curving in much) and is deeper.

Get a zorst that goes UNDER the 8v bumper without needing cutting, and sticks out about 2 inches. then if you get a 16v you can cut the bumper slightly but the exhaust will be pretty flush with it