Page 1 of 1

6n2 lowering ...?

Posted: Wed May 04, 2005 6:59 pm
by siilver
what is there i can do
dnt want 2 spend to much cash and only wnt 2 lower max of 40mm and puttin the car on 16"

plz help what my best way 2 go bout it

Posted: Wed May 04, 2005 8:23 pm
by tom_mk5
If you're not wanting to spend much mate your best bet is getting a set of springs on standard shocks. Something like Spax, G-Max or eibach can all offer lowering of your car between 30 and 60mm. To be honest I wouldn't recommend going down 60mm on standard shocks.

Higher budget you can get a full suspension kit with shocks and springs like i've just done, offers excellent quality and good ride.

Even higher budget is adjustable coilovers.

Even even higher budget is hydraulics...;)

How much do you wanna spend?:p

Tom

Posted: Wed May 04, 2005 8:45 pm
by siilver
well if i can get a cheap set of shocks and springs, i would do that (bout 200£ish)

but i wouldnt go in 2 coilovers r anything like that 2 much cash

and im only lowering a bit and i have heard that bout 40 is ok to do on standards

Posted: Wed May 04, 2005 8:47 pm
by carmadaaron
siilver wrote:well if i can get a cheap set of shocks and springs, i would do that (bout 200£ish)

but i wouldnt go in 2 coilovers r anything like that 2 much cash

and im only lowering a bit and i have heard that bout 40 is ok to do on standards
i know some ppl running -60mm on standard shocks, the ride quality is affected and is quite bad, its a cheap option tho, just upgrading springs.

Posted: Wed May 04, 2005 8:53 pm
by siilver
but how do u think the ride wolud b on 30/40mm drop ??

Posted: Fri May 06, 2005 9:43 pm
by polopowah
the ride would be very good at 30mm and good at 40mm, if youy use standard dampers then the car should behave very similiar to how it did before the lowering springs.
-Ben-