Page 1 of 1
Scraping/rubbing noise when turning the sterring wheel
Posted: Sat Jun 25, 2005 2:12 pm
by BLACK6N_POLO
My uncle has just bought a purple 1.4L 6n -- and occasionally when u turn the steering wheel there is a scrapping noise (inside the car) -- plastic against plastic i think --- a mate told me he knew some one with this problem and he had to remove the steering wheel and rub some thing dwn-- has any one gt/had this prob??? how do u fix it ?? step by step if possible plz
thanks if u can help!
Posted: Sat Jun 25, 2005 7:38 pm
by polo_mf
jason my car had this problem not someone i know!! ill find out for u tonite
Posted: Sun Jun 26, 2005 2:19 am
by waseem0000
i has faced a problem as this and it was in the suspinions and some stuffz there witch tied with the tyres
sorry i cant explan really cuz of ma weak english

Posted: Tue Jun 28, 2005 5:21 pm
by 13twelve
i had it to
every few months it would happen
and then dissapear real quick
how ever, the supporting bracket that held the wheel height locking thing in place, broke.
Posted: Tue Jun 28, 2005 6:36 pm
by James0121
i had this problem and posted it a while back this is quoted from the post i put it has solved it and never had the noise back.
"The scrapping noise is probably and more than likely the horn connection! these is a ring of brass on the steering collum, and on the back of ur steering wheel is a sorta springy pin! its those rubbing together as u turn the wheel!
remember i have been in ur car and i know the sound that u are talking about and i'm sure i told u this before!
u need to remove the steering wheel (not sure how), clean up the surfaces with some rag or summit and i used a bit of silicone grease to stop mine making noise! when i did that it got quieter and quieter as time went on and it has now gone i believe! "
Posted: Thu Jun 30, 2005 3:49 pm
by AshBlueMk4
On some models there is a rubber boot if the recall has not been done. The boot should be removed because it squeeks against the bulkhead
ash
Posted: Thu Jul 07, 2005 8:37 pm
by mysteryboy
could be something to do with wheel alignement.... (dont take my word for it just a possibility)