Page 1 of 1
Urgent Help With Coilovers
Posted: Mon Jun 27, 2005 1:13 pm
by stuart_hatch
Ok, i have my AVO coilovers fittet, but when i take the car off the stands it drops a good 2-3 inchs, i belive im missing top mounts or possibly spacers.
Anyone got any ideas?
Even instructions would help!
Posted: Thu Aug 11, 2005 10:31 pm
by warrmr
rubber brushes.
does the post stick out of the topmounts like that when you drop it down. if so then the rubber brushes are missing. what you want is your old suspention struts and compress the springs and undo the bolt on the top and slide the rubber brush off the top of the post. then wind your coilies to the lowest they go then slot the brush on and put the bolt on remount them on the car then ajust to perfect height. then the post will only stick through about 10mm after the bolts are on the top mounts.
Posted: Fri Aug 12, 2005 1:28 am
by stuart_hatch
Feck, you took your time replying. Theyve been sorted for two months now
Posted: Fri Aug 12, 2005 10:20 am
by carmadaaron
hes a new member, just registered yesterday:)
welcome to the forum btw!
Posted: Fri Aug 12, 2005 8:38 pm
by warrmr
oops didnt see the post date. i jus assumed as it was on the first page it was a new post. oh well. ill learn