Page 1 of 1
toad ai606 immobiliser help
Posted: Wed Jul 13, 2005 12:18 pm
by k4lps
i need some help installin an Ai606 in a mk2 polo,
first thing how do i tell if somethings +12v switched eg for the indicators?
where do i connect the immobilistaion wires to? its got a plug on the end
didt relise that there was this many wires
Re: toad ai606 immobiliser help
Posted: Sun Oct 16, 2005 1:16 pm
by MR_TOAD
k4lps wrote:i need some help installin an Ai606 in a mk2 polo,
first thing how do i tell if somethings +12v switched eg for the indicators?
where do i connect the immobilistaion wires to? its got a plug on the end
didt relise that there was this many wires
Hello if you E-mail me on
[email protected]
I should be able to help
Regards Ian
Re: toad ai606 immobiliser help
Posted: Sat Apr 15, 2006 1:16 am
by k4lps
MR_TOAD wrote:k4lps wrote:i need some help installin an Ai606 in a mk2 polo,
first thing how do i tell if somethings +12v switched eg for the indicators?
where do i connect the immobilistaion wires to? its got a plug on the end
didt relise that there was this many wires
Hello if you E-mail me on
[email protected]
I should be able to help
Regards Ian
you already have mate over on club gti....i forgot my username lol but since your over here aswell im still stuck on where to put the box. as you said to put it behind the clocks i found that theres not much space.so i was wondering would i get a thatcham cert if i bolt it behind the centerconsole
its a bit like this like this from the guages holes downwards. you can put your hand right behind the consol if you try