Page 1 of 1

Would This Work????????

Posted: Mon Jul 18, 2005 4:01 pm
by mppolo
Image

the pannel filter has been removed but i have left the airbox on connected to the oil breather, will this cause anyproblems

cheers

Posted: Mon Jul 18, 2005 4:07 pm
by forbezGti
not sure, take away the air box and fix the pipe straight onto the throttle body would be better.

Posted: Mon Jul 18, 2005 4:11 pm
by Tigz
Fitting a catcher tank would be a better idea.
This will stop the oil clogging up the throttle boddie.

Posted: Mon Jul 18, 2005 4:28 pm
by mppolo
whats a catcher tank

Posted: Mon Jul 18, 2005 4:54 pm
by Tigz

Posted: Mon Jul 18, 2005 6:44 pm
by polo2k
dont run that set up because on a cold start the warm air valve will flow dirty air into the throttle body

Posted: Mon Jul 18, 2005 9:01 pm
by Tahrey1043
could block off the warm air feed of course

or at least duct tape a sock into it :D