UK-POLOS.NET - THE VW Polo Forum

Posted: **Sun Sep 11, 2005 2:57 pm**

just a quickie...are bump strips bolted or glued on on my 6n??? cheers

Posted: **Sun Sep 11, 2005 5:18 pm**

cheers boss!!

Posted: **Sun Sep 11, 2005 6:43 pm**

yep be careful, maybe 'slice' the glue using some thin fishing wire?

Posted: **Sun Sep 11, 2005 7:57 pm**

i just pulled mine off and removed the remaining glue with a rag and some petrol, worked a treat

Posted: **Sun Sep 11, 2005 8:15 pm**

i'll give it a try tomorrow!!! cheers

Posted: **Sun Sep 11, 2005 8:23 pm**

best thing is to use some dental floss, its just as kind and caring to your paintwork as it is to your teeth

(in other words, as its foamy it will minimise surface scratches from occuring.)

Posted: **Sun Sep 11, 2005 8:29 pm**

loud wrote:i just pulled mine off and removed the remaining glue with a rag and some petrol, worked a treat

I did the same and it was fine....dental floss kept snapping (probably should of used the hair dryer first...but couldn't be bothered) and I couldn't be arsed to wait for my brother to bring some fishing line. So I just ripped them off !

But I used WD40 instead of petrol, cause I didnt have any at the time !

Posted: **Mon Sep 12, 2005 11:46 am**

Make sure you heat up the glue first - always a good thing

J