UK-POLOS.NET - THE VW Polo Forum

Ok im still on the hunt for a new splitter and its now more serious than ever as ive had my current on taken off (it was knackered, and also makes me get my arse in gear)

i really want the rieger infinity one from

http://www.uk192.com/shops/riegeruk/pro ... at=80&pg=2

the 90mm on there is the one i need to make everything level height wise but it says its for 16v 6N modles only

how much work will be needed, modification wise, to make it fit my 6N2, cant imagine the dimensions are too different?

or am i best to just go for the 6N2 one and try and mod that instead?

i had the rieger infinity one for 6n2 and it goes down pretty low mate to be honest, i smashed mine up within a week, beware of ALL pot holes and slightly raised drives. went for the gti splitter after that

how low wud you say it was in the end, and how hard was it to fit?

sorry to nag but i only get one shot

i wud say it was extremly low, hence smashed when hittin pot hole. fitting is not to bad, u gonna need to drill holes and screws to keep it attached, but apart from that it just slots into place. gti splitter u dont even need 1 screw, it fits real secure but u have to strech it all the way round.

ello infa red
check mine out in my signature, thats the reiger infinity front splitter for the 6n2, you'll be suprised how deep it is, i catch it alot of the time underneath

-Ben-

ah right! cool

is ur polo lowered?

yeah -75mm on 16's

-Ben-

lol thats why its so slammed

it looks cool man i have to say but my dub is still on standard springs

ive got my old one back for now and im gna have a stab at modding it as its like 100mm deep or more

ben u got FK AK coilys?

nothin2lose wrote:ben u got FK AK coilys?

nah s**t spax rsx coil-overs AVOID AT ALL COSTS! though they might be better since they changed the gas that they use to Krypton (apparently its much softer and less dense)

-Ben-