Page 1 of 1
Toad Ai606 + Mark4 Polo
Posted: Mon Oct 10, 2005 4:33 pm
by antonio_king
The whole lot is wired up, except I can't get the damn remote central locking to work...
What coloured wires on the alarm connect to, what coloured wires on the polo?
cheers!
Also, Has anyone set there AI606 to turn on headlights, and close/open windows? If so... What wires go where.. Lol.
Also also... Has anyone got the type 2 microwave sensor, and type2 impact sensors? If so... What wires go where? (they didnt come with instructions)
Cheers Fellas...
Antonio
PS: I'm new here, hi!
Posted: Mon Oct 10, 2005 5:42 pm
by macemc86
havent a clue how to help, but welcome to the forum matey
Posted: Mon Oct 10, 2005 5:44 pm
by DScape
Hi there, I can't help either
welcome to the forums though!
Maybe you could help me.....how much did one pay for this alarm, because I was looking at getting on the other day!
Posted: Tue Oct 11, 2005 10:50 am
by antonio_king
I paid £102 for it... Ebay. came sealed.
Was an extra £11.50 for postage.
Funky alarm, I have to say!
Posted: Tue Oct 11, 2005 3:39 pm
by DScape
antonio_king wrote:I paid £102 for it... Ebay. came sealed.
Was an extra £11.50 for postage.
Funky alarm, I have to say!
Exactly the same place I've been looking at one
Did you dub come with C/L as standard? Mine don't unfortunately, so I'd need to get that sorted too....along with fitting, because I'd bugger it all up
Glad you like it dude, Im gonna have to get one
Posted: Tue Oct 11, 2005 4:09 pm
by mysteryboy
I can help!
But.. Don't want to...
Only joking! Welcome
Posted: Tue Oct 11, 2005 4:45 pm
by antonio_king
@DScape... Brought my N reg 1.4 CL For £550, My first car, she needed a new windscreen, gearbox, clutch, 4 new tyres, and numerous little things.
I'm 18 years old, I've had my dub since January the 27th of 2005, and I've been legally driving it since April the 1st.
So thats a break down of my cars history.
@Mysteryboy... Go on, spill the beans. Help me protect my polo...
Posted: Tue Oct 11, 2005 9:16 pm
by AKs_SlickPolo
I can help you. ive fitted about three alarms in 6n Polos.
First of all where have you located your alarm unit module? is it under the steering or on the passenger side?
The mk4 has pnumatic locking but you need to create an extended +ve pulse in order to make this work... so u need to follow the wires on the alarm that control a positive pulse C/L locking system. You have to do a bit of splicing and soldering of two wires that are coming into the car from the doors. The c/l pump has nothing to do with this connection
Posted: Wed Oct 12, 2005 8:38 am
by antonio_king
the unit is situated on the passenger side.
So I use the Positive Central Locking method... Not Negative?
Someone told me negative... I followed that and f**k all happens.
Which 2 coloured wires do I wire into on the polo passenger door?
Posted: Thu Oct 13, 2005 8:34 am
by antonio_king
WOOP! Fixed it!
Posted: Thu Oct 13, 2005 8:54 pm
by AKs_SlickPolo
Cool, i think you must have wired a wire that needed to be soldered to a +12v wire to a earth point hence why nothing happened!
Posted: Thu Oct 13, 2005 10:40 pm
by antonio_king
yup!