Page 1 of 1

alloy advice

Posted: Wed Nov 02, 2005 9:23 pm
by twistedl
I have been looking at these:
http://cgi.ebay.co.uk/ALFA-FIAT-LANCIA- ... dZViewItem

I am wondering if they will fit my 1998 r reg polo 1.0 L. Any help would be apreciated. Also what size tyres should I get if I want them to be fairly low profile.
Ps sorry about the link I could not work out the URL thing

Posted: Wed Nov 02, 2005 9:32 pm
by BLACK6N_POLO
Ur polo is size 4x100 they are 4x98 i dnt think they will fit soz mate

(get a second opinion though i aint a wheel expert)

Posted: Wed Nov 02, 2005 9:32 pm
by ModifiedMadness
I thought that as well, but wanted someone else to say

Posted: Wed Nov 02, 2005 9:40 pm
by twistedl
thanks for your advice ill have to find some others

Posted: Thu Nov 03, 2005 1:46 am
by JTLondon
search for VW wheels when looking on ebay... some even say suitable for VW but arent... cos the centre bore may be too small... or too big (which you'll need sprigot rings or something like that).

Basically you're after 4x100 stud config, centre bore of 57.1mm and offset ET35... though some people put wheels of other offsets.