UK-POLOS.NET - THE VW Polo Forum

Hi peeps,

I wonder if any1 can help, I recently sold my Mk4 8V MPi polo to a good friend, now he wanted the BMC fitted.

I ordered 1 for the mk4 8v and my local VW mechnic stated that it couldnt be fitted becoz the throttle body was to small on the car, altho the BMC did come with a reducer.

Can any 1 reccommend a good mechnic that will be able to fit this either London or preferably Yorkshire (bradford).

buy connecting tubes yourself mate and install it, its pretty straight forward really !

maybe use some jubilee clips to connect the tubes/pipes?

thats what i did on my motor !

Cal

CalvinGTI wrote:buy connecting tubes yourself mate and install it, its pretty straight forward really !

maybe use some jubilee clips to connect the tubes/pipes?

thats what i did on my motor !

Cal

The car has been sold to a friend and he is up north in the bradford area am down in London, and he aint gonna attempt doing it at all.

Really after a mech in bradford/yorkshire area................

(i just realised I opened this mk3 polos can some 1 move this to mk4 forum please)

I ended up with a mk4 induction kit for my mk5.

The mk4 throttle body is alot wider than the mk5.

I just sent it back for a new mk5 one.

Or is there any1 in the yorkshire(bradford) area willing do the Fitting, am down in London obviously my friend will pay for the job to be done....