Page 1 of 1
Lowering...... i need to be lower!
Posted: Fri Dec 30, 2005 10:58 am
by M1 TCH
hi guys
i recently lowered my polo 6n 60mm all around.
now i look at it and i still think it needs to be lower.
whats the lowest spring i can buy? where from?
probly looking around 95mm
any help appriciated.....
mitch
Posted: Fri Dec 30, 2005 1:17 pm
by polopowah
60mm is the lowest you'll find unless you start cutting them, which i do not recommend!
you'll be needing a set of coil-overs my friend.
Fk do some great sets for 299 quid and you can lower it upto 100mm
-Ben-
Posted: Fri Dec 30, 2005 1:21 pm
by M1 TCH
299?????
i thought they were like 350-400!!!
ROLL ON COILOVERS!!!
lol
where can i get them from?
mitch
Posted: Fri Dec 30, 2005 1:22 pm
by M1 TCH
also..... i like your splitter!
wheres it from?
will it fit my 16v bumper 6n?
mitch
Posted: Fri Dec 30, 2005 1:29 pm
by polopowah
ok that 295 quid set was 255 quid, my bad but that only lowers to -70mm
if you want -100m then check this link
goto
www.venommotorsport.com
shop > suspension > coilovers > FK > Highsport
and my splitter is the reiger infinity one on a 6n2
-Ben-