Page 1 of 1

no amp power

Posted: Mon Jan 02, 2006 2:05 pm
by badboypolo
just wired everything up and there is now power going to my amp? any ideas? :?

Posted: Mon Jan 02, 2006 2:09 pm
by ModifiedMadness
Check your remote cable is connected where it should be, that's the problem I had.

Posted: Mon Jan 02, 2006 2:32 pm
by badboypolo
from the amp to where? the remote cable very thin blue wire?

Posted: Mon Jan 02, 2006 2:41 pm
by James0121
mine goes from the amp to the back of the headunit and yes thin blue wire

Posted: Mon Jan 02, 2006 2:54 pm
by ModifiedMadness
As above, it will be the thin blue wire, it runs from the "remote on", on your amp to usually a blue ignition wire connected to the head unit (see manual)

Posted: Mon Jan 02, 2006 3:37 pm
by badboypolo
thanks a lot, thats me up n running! 8)

Posted: Mon Jan 02, 2006 3:51 pm
by ModifiedMadness
Was it not connected? :lol:

Posted: Mon Jan 02, 2006 6:58 pm
by badboypolo
wasnt conected, and would never have known to connect it to the blue and white wire. cheers m8 :D

Posted: Mon Jan 02, 2006 7:43 pm
by ModifiedMadness
No worries, I had that trouble, only mine was connected just not to the right wire from the H/U :lol:

This time in the Polo www.sqplus.com are going to be doing it for me.