UK-POLOS.NET - THE VW Polo Forum

as you all guessed... i took it out!

why???

we shall see friday (hopfully)......

you couldve posted the pic in one of ur other 2 dash related threads

true....

didnt think of that

mitch..i took mine out approx.6months back now and i also removed the heater piping and matrix.
now the only problem is...i was dumb enough not to label the screws in a bag. Would you mind taking photos of the different types you removed and where they went?

Please? I hope so...

shouldnt be a problem sanj...

i may have spares after my new dash has gone in so if you need any, let me know....

i'll try and gets pics later 2day.....

mitch

could you take a snap of where the matrix is when the dash is out please mate.

will do rich

it will be tomorrow as ive put the dash back in today as i had to travell....

i will also get dubbprinces pics for the nuts and bolts

mitch

bit of glossy paper, a good printer and a decent pair of scissors!!!



take you an hour tops.....

you want a set?

Hand made, very nice mate.

hand made and easy as.

the newer dash isnt a problem. you remove the surround and theres 2 screws, remove them and the clocks come straight out.

i took my clocks to bits, scanned in the original black dials and inverted the colour! hey presto!

mitch

M1 TCH wrote:hand made and easy as.

the newer dash isnt a problem. you remove the surround and theres 2 screws, remove them and the clocks come straight out.

i took my clocks to bits, scanned in the original black dials and inverted the colour! hey presto!

mitch

YES! I've been planning on doing this but was too much of a wimp to take my original clocks apart so was planning on getting some spares from the scrappy.

Have you still got your scanned image M1tch? Is there any chance you could email me a copy?! Please!

thanks mitch!