Page 1 of 1

badges n side mouldings

Posted: Mon Feb 27, 2006 10:12 pm
by MintySE
can anyone tell me if i take the badges n strips off r there any holes
underneath ? :roll:

Posted: Mon Feb 27, 2006 10:27 pm
by polo boi
the stripes r held on by stickies, wen u take then off make sure u have heat 2 them coz they remove easier, e.g. hairdryer or heat gun, i idnt use either an im not left wit sum glue still stuck 2 da door :cry: the badges r also stuck on, well the back 1 is anyway i think

Posted: Mon Feb 27, 2006 10:56 pm
by mysteryboy
There is no holes. They are stuck on. As stated above... heat them up using a hair dryer and slowly take it of using some dental floss/credit card/fishing line (what ever you have).
You will be left with a bit of glue... so use some petrol or tar remover to get the glue off and t-cut it if needed.
(If using petrol to remove glue...wash it off as soon as you're done)

Posted: Mon Feb 27, 2006 10:56 pm
by vdubyabush
spot on ^ :D

Posted: Mon Feb 27, 2006 11:03 pm
by mysteryboy
u ready for a scary pic of what you're getting yourself into??

I dont think you are but here goes :lol:


Image

Posted: Tue Feb 28, 2006 11:16 am
by polo boi
thats exactly wot mine looks like wit the glue on an sum just told me 2day about the petrol, so i'll give it ago :D

Posted: Tue Feb 28, 2006 11:21 am
by MintySE
thanks ppl i will be careful
hopefuly will have time 2 do it b4 ultimate dubs on sunday lol
also how easy is the frnt badge 2 remove frm the grille so i can spray it black

Posted: Tue Feb 28, 2006 4:58 pm
by mysteryboy
MintySE wrote: also how easy is the frnt badge 2 remove frm the grille so i can spray it black
Same process