UK-POLOS.NET - THE VW Polo Forum

Posted: **Sat Sep 20, 2003 10:58 am**

Polo 6N: Fitting a post - 1998 Engine Cover

Works on 6N cars with MPI - those with SPI can use this too, but they'll need additional customizing of the cover to allow for the accelerator cable.

Most Pre-1997 cars came without an engine cover, leaving all wiring and metal exposed. To clean this up a bit, I fitted the 1998 and onwards engine cover.

Read how here:

Printer Friendly PDF file

Get the reader if you don't have it already:

Posted: **Sat Sep 20, 2003 12:29 pm**

v good write up there Alex. always wondered how easy that was to do....

Roll on payday!

Posted: **Sat Sep 20, 2003 1:35 pm**

Yeah it's not that hard, I'd say it rates as 'low' on the Guru Level Scale. Quite fulfilling mod though!

Posted: **Sat Dec 11, 2004 7:36 pm**

i've got a few pics of the modifications needed for the cover to fit spi cars

pm your email address and i'll send them to you..

Posted: **Sat Dec 11, 2004 7:46 pm**

Would i be able to fit an engine cover to a gt? (mk3)

Posted: **Sat Dec 11, 2004 9:37 pm**

I'd imagine you could fit a mk4 cover, as they're pretty much the same engine (the smaller engines, that is..). Probably need some modification though..

Posted: **Fri Dec 16, 2005 11:33 am**

where can i get all these parts? can i get em from VAG com?

Posted: **Fri Dec 16, 2005 2:56 pm**

are all these part numbers the same for UK?

UK-POLOS.NET - THE VW Polo Forum

6N - Fitting a post 1998 Engine Cover

6N - Fitting a post 1998 Engine Cover