Page 1 of 1
mk2 lowering
Posted: Tue Mar 14, 2006 9:50 pm
by willriseley
anyone know if i would have any trouble with lowering a saloon mk2 70mm on standard wheels????
Posted: Wed Mar 15, 2006 7:09 pm
by mk2matt
it would be fine but ground clearance would be very low
i would lower it 70mm on 14" alloys or steelies
im not sure if you can lower it on 15's yet
Posted: Wed Mar 22, 2006 9:27 pm
by yolmol
nah shouldnt have too much troubles.. ground clearance shouldt be TOO much of an issue if your carefull (basing this on polos in general rather than salons)
Do it man... will look good
Posted: Thu Mar 30, 2006 11:45 am
by chris_lofty
sorry to hijack this post, but does this mean that -70mm (im plannin using avenom motorsport loweriung kit) springs or springs and damper will be fine over 13" alloys? ive got a g-reg mkII.
if so which would be better? springs alone or springs and dampers?
cheers guys,
lofty
Posted: Thu Mar 30, 2006 7:26 pm
by mk2matt
if your lowering more than 40mm its best to do the springs and dampers
Posted: Wed May 10, 2006 1:36 pm
by willriseley
im planning on dropping it 70mm over stock wheels painted cherry red with whitewall tyres.the body is either gonna be matt black or matt green any ideas on which colour???? with a full on fake fur interior?[/img]