Page 1 of 2
Dom and Rae Lowered the Po-LOW
Posted: Wed Mar 15, 2006 8:14 am
by djsimmy
Posted: Wed Mar 15, 2006 9:09 am
by alexb
what you lowered it on mate and how much?
Alex
Posted: Wed Mar 15, 2006 1:06 pm
by djsimmy
springs and shocks of german ebay its 80mm
Posted: Wed Mar 15, 2006 1:27 pm
by Reeyad
djsimmy wrote:springs and shocks of german ebay its 80mm
That doesent look like a 80mm drop I think it needs time to settle.
Posted: Wed Mar 15, 2006 1:37 pm
by djsimmy
well it is. everybody has said that. it looks a bit lowered 2day but ur right needs time to settle. pluss there 13's with 55 tyers on
Posted: Wed Mar 15, 2006 1:45 pm
by Redline
Yeah, I think it's the 13's being so set into the arches that don't do it justice.
Posted: Wed Mar 15, 2006 1:46 pm
by djsimmy
if i had 15's they would be no arch gap and look lower
Posted: Wed Mar 15, 2006 2:18 pm
by PhilGTi
The gap from the centre of the wheel to the arch is the same as mine, purely because the wheels are tiny that it looks high. With more suitable wheels it will look pimp.
Posted: Wed Mar 15, 2006 2:25 pm
by djsimmy
hope so we will see might go for 14's

Posted: Wed Mar 15, 2006 2:29 pm
by PhilGTi
In my opinion, the only wheels id go for is 15x7 or 15x7.5 anything else wont look low enough and will have a arch gap!
Posted: Wed Mar 15, 2006 2:33 pm
by djsimmy
15 x7 will rub tho wont they?
Posted: Wed Mar 15, 2006 2:36 pm
by PhilGTi
No, not if you cut a tiny peice of the arch away, i mean tiny, like 2cm by 2cm square.
Posted: Wed Mar 15, 2006 2:38 pm
by djsimmy
think ill stick to 15 x 6.5
Posted: Wed Mar 15, 2006 2:48 pm
by PhilGTi
It will look s**t, the wheels will be sat in the arches...
Posted: Wed Mar 15, 2006 2:51 pm
by Redline
What about using spacers?