UK-POLOS.NET - THE VW Polo Forum

Hi,
I was wandering if anyone knows the size of the Gti's throttle body outlet ?

The reason i'm asking is that i'm away to make up my own CAI kit, but need to know size so i can order the pipe for between that and my air filter.

I'd check myself but i'm working away in Africa at mo with ma work

Cheers

P.s. I've been reading up on my car and it says it has an "EDL Diff Lock"

What does that actually do ?

OD of the throttle is 65mm

Cheers

I used 63-76mm 90degree samco hose, folowed by the halfords bmc replica. I then used 76mm samco connector, going to a 90deg alloy elbow, another connector, then a 45deg alloy sleeve, straight down where my charcoal cannister once lived (now relocated), follewed by some ducting going to the fog light housing. Looks and sounds amazing, though cost over £130 in total.

some ducting going to the fog light housing

Will it get some water into filter??

Ok cheers v dubit.
Where you get the samco hose from ?
I've been looking about in aberdeen for samco hoses and no one has them

Where did you relocate charcoal canister ?

Cheers

vdubit wrote:I used 63-76mm 90degree samco hose, folowed by the halfords bmc replica. I then used 76mm samco connector, going to a 90deg alloy elbow, another connector, then a 45deg alloy sleeve, straight down where my charcoal cannister once lived (now relocated), follewed by some ducting going to the fog light housing. Looks and sounds amazing, though cost over £130 in total.

You got any pics mate?

Got my BMC fitted but want to make the ducting better.

Lost digi cam lead at present, when i find i'll post some. Its defo the best looking gti engine bay i've seen.

Got hose's from demon tweeks, they list all the different sizes on there site. Got all the alloy tubes from a local chav car shop.

Ok cheers V Dubit.

I'll have a nosey this weekend at there site.

After i've tried that window motor si sent me