Page 1 of 1

polo and gti badges

Posted: Fri Apr 14, 2006 4:30 pm
by Polo_Gio
Hi all,

I'm considering takin the letters from polo and gti to make up GIO to stick on my polo somewhere. First off whats u's think about that? I think its pretty different.

Surely not chavvy as its not a 16v or any daft decals - should blend in with polo badge. And its not gonna be spaced out under the rear badge like i have seen on some corsa's........very chavvy.

Second of all where else could i put it .....on the rear obv but where........opp side of polo so its balanced or below the right hand rear light.?? am open to decisions

Lastly how to i reattach them? is double sided tape good enuf???

Posted: Fri Apr 14, 2006 11:59 pm
by h4r1s
i think you can reattach them with those sticky pads which are used to stick number plates on, they may make the letters stick out a bit tho :?

Posted: Sat Apr 15, 2006 12:16 am
by inder
Buy the two decals new - then they will come with the correct thin sticky layer for you to stick them on secure with :P

Posted: Sat Apr 15, 2006 5:11 pm
by Polo_Gio
Nah, i've been lucky enough to find a really decent guy on here who has debadged his polo and am the lucky guy who gets them.

What about the positioning of them??

Posted: Sat Apr 15, 2006 5:12 pm
by ModifiedMadness
I'd put it where it usually has the engine size.

Posted: Sat Apr 15, 2006 6:19 pm
by Polo_Gio
How long before someone asks what a "gio" is........i'll be like u musta heard of it, TDI SDI GTI GIO nah??

lol would i be the first to do this or has it been done b4?

Posted: Sat Apr 15, 2006 7:05 pm
by Si_GTi
I don't think 'GIO' has been done before - iceypolo has got 'POLOW' on his bootlid I think!

I agree with MM, place the letters on the right-hand-side of the bootlid where the model designation (eg. GTI, TDI, 1.4) would normally be. Looks OEM then 8)

Posted: Sun Apr 16, 2006 1:24 am
by Polo_Gio
sounds gud to me. well gio is obv jut the abbreviation of my full name.

just gotta find a slim sticky tape to secure it with..........hmmmmmmmm

Posted: Sun Apr 16, 2006 8:59 am
by Giorgio
Polo_Gio wrote:sounds gud to me. well gio is obv jut the abbreviation of my full name.

just gotta find a slim sticky tape to secure it with..........hmmmmmmmm
If your name is Giorgio then 8) 8) 8) 8)

Had a photoshop of GIORGIO made up to see what it would look like as a keyring made up of VW lettering. Looked super gay.

Posted: Sun Apr 16, 2006 4:14 pm
by Polo_Gio
ehhh no.

My full name is Giovanni. Perhaps you could post up this picture so we can see it. If it is indeed "super gay" well at least i can say i havent wasted money on it and even if i do it its an easy thing to remove.

Posted: Sun Apr 16, 2006 8:49 pm
by tupac2makaveli71
you could use double sided tape....but it doesnt stick to well if you dont cut it properly, you have to cut it EXACT to the shape of the lettters then it will work wonders

Posted: Mon Apr 17, 2006 8:10 pm
by Polo_Gio
Yeah i was thinking. Well we'll see how it all goes.

Could just decide to keep the car forever and use super glue......... :?

Only a joke.

Posted: Mon Apr 17, 2006 10:26 pm
by Giorgio
Polo_Gio wrote:ehhh no.

My full name is Giovanni. Perhaps you could post up this picture so we can see it. If it is indeed "super gay" well at least i can say i havent wasted money on it and even if i do it its an easy thing to remove.
sorry bud it was so gay i deleted the pic (needed to reboot my windows so i had to ditch loads of crap)

Posted: Mon Apr 17, 2006 11:14 pm
by Polo_Gio
Fair enough - I have to remaster my computer all the time - does my head in.