Page 1 of 2
GTi parts to 6n2
Posted: Mon May 01, 2006 12:42 pm
by lilpee123
I dont know whether this sort of thing has been done before but just wanted to know what parts/bits can be taken from a Gti and added to a standard 6n2?
Just could start a list so people know what can be done to there car. Could also add bits from other cars as well if you know what fits.
Posted: Mon May 01, 2006 2:24 pm
by DanDiesel
depends wot GTI ur talking about?? golf? polo? lupo? ibiza?
gotta be more specific mate!
Posted: Mon May 01, 2006 2:28 pm
by lilpee123
Well Polo GTi 6n2 mainly but like i said if you can also think of any parts from different makes/models that would be cool.
Posted: Mon May 01, 2006 2:29 pm
by ICEYPOLO
think they do mean the 6N2 GTi mate,
bumpers
grill
foglights
stuck after that...
scott
Posted: Mon May 01, 2006 2:33 pm
by lilpee123
I mean there must be other bits that people have fitted, like interior parts, engine parts, A/C anything.
Just trying to get some sort of list together so we can see what is actually possible.
Posted: Mon May 01, 2006 3:09 pm
by ModifiedMadness
Well the engine is obvious because they're the same car, same with the interior
Posted: Mon May 01, 2006 3:22 pm
by smash_it_up_666
front splitter and rear spoiler
Posted: Mon May 01, 2006 3:48 pm
by DanDiesel
ok now i've read it again it makes more sense!!
everyone forgot alloys!!
Posted: Mon May 01, 2006 4:00 pm
by smash_it_up_666
headlights, if you can afford 1 of those little power adapter thingys aswell
Posted: Mon May 01, 2006 4:00 pm
by jon_poloV
Gear knob ,gatier, mats, seats, door cards, badges, grill badge, almost everything
Jon
Posted: Mon May 01, 2006 5:07 pm
by Alex_6n2
Everything from a 6n2 GTi will fit the other 6n2 models I think.
Obviously things like clocks require more work and the engine is obiously a big job but underneath 6n2s are all the same shell
Posted: Mon May 01, 2006 7:46 pm
by h4r1s
Would the brake calipers from a Gti fit a 6n2? asked this so many times never got a reply
Posted: Mon May 01, 2006 9:07 pm
by Alex_6n2
You might need to change the caliper carriers as well, but yea
Posted: Mon May 01, 2006 11:17 pm
by lilpee123
what does it take to get the headlights to work from a GTI is it a simple swap over?
Also fogs lights which other models of VAG cars have the same fogs and will fit?
Regards
Posted: Tue May 02, 2006 12:01 am
by Alex_6n2
6n2 fogs are individual I think
As for the GTi xenons you need to loom too?