Page 1 of 1

[6N w8 domelight mod] Intesity-light wire??

Posted: Wed May 24, 2006 4:33 pm
by Berseker
Hi all...i'm trying to do the w8 domelight mod, and i've a question for you...

which of the wires down here

Image

is the intensity-of-light-wire?? i thinks it's one of the red plug's wires, but i wonder which is the correct wire!! i need it for turning-on the red leds of the domelight when the position-lights or the headlights are turned on.....

help plz...thankyou

Posted: Wed May 24, 2006 4:35 pm
by polo boi
ok, i think i understand wot u mean, r u askin which wire to wire up the interior neons on2, which wire is it 2 the side lights or headlights? i dnt know coz i havnt did it yet, but let me know if u get it done

Posted: Wed May 24, 2006 5:13 pm
by Berseker
I'ts hard to explain for me because i'm italian and my english is not so good..simply i've seen a walktrough for doing this mod on a 6n2\mk5, and in that model there is a different plug with differents wire, and in the guide the wire for turning on the leds have to be connected in a pin n.17, which is not present in the 6n...as far as i know, the leds of the domelight have to turn on when you turn on the positionlights or headlights...in a similar way the tacho or the clima-control-light turn on... i hope i explained myself...eheh

Posted: Wed May 24, 2006 5:55 pm
by Berseker
I was thinking of it..maybe i'll go to connect my wire to the light wire of the headunit...i think it's the best solution for me...

Posted: Wed May 24, 2006 7:30 pm
by polo boi
b careful that u dnt blow the head unit