Page 1 of 1
Can Corsa Alloys fit my MK5 POLO?
Posted: Tue Jul 18, 2006 8:50 pm
by Mac_daddy
hey.. just wanted to find out if any one knows if a set of corsa sxi alloy would fit on my mk5 polo. I've done a photoshop job on them and they look ok on my polo but need to know if they have the same fitting as the polo. The wheels are 15" 4stud.
If not what wheel specs do i need to be looking for?
here are the wheels :
http://cgi.ebay.co.uk/Vauxhall-corsa-st ... dZViewItem
Let me kno cheers
Posted: Tue Jul 18, 2006 8:58 pm
by ModifiedMadness
Depends what PCD they are, the Polo stud pattern is 4x100
Posted: Tue Jul 18, 2006 9:32 pm
by Mac_daddy
This might sound silly but can you tell me what the pcd is? as i am new to all this car talks. I've looked back on ebay to see if it has any more info on the wheels but only see tyer width and aspect ratio.
Posted: Tue Jul 18, 2006 9:33 pm
by ModifiedMadness
From what I understand the PCD (Pitch Circle Diameter) is the measurement from the middle of one hole to the other.
Posted: Tue Jul 18, 2006 9:42 pm
by MaxZ
the corsa PCD is same as polos, however they have different offset to the polo so pls check that the offset suits the polo
Posted: Tue Jul 18, 2006 10:43 pm
by Ross Clarke
PCD is the same but IIRC the centre bore is also different aswell as the offset.