Page 1 of 3
Speakers
Posted: Mon Jul 31, 2006 6:30 pm
by Arnoldo
Goin to get a new set of speakers for the polo and Im lookin at Focals. Anyone know what size I can get e.g. whats the size of the current ones?
Cheers lads

Posted: Mon Jul 31, 2006 7:00 pm
by MaxZ
the ones in the front are 16cm
Posted: Mon Jul 31, 2006 7:18 pm
by Arnoldo
Posted: Mon Jul 31, 2006 7:26 pm
by MaxZ
i doubt it.. they're 16.5mm which means they wont go into the alloted slots so you will have to either drill them yourself or get an adaptor from caraudiosecurty. I'd recommend the alpine speakers.. i have a set and they are crystal clear. make sure you get components
Posted: Mon Jul 31, 2006 7:31 pm
by Arnoldo
Any chance they will squeeze in? They are like half a mm out like?
I also bidded on them which is another prob
Posted: Mon Jul 31, 2006 7:38 pm
by MaxZ
they're 5mms out which is quite a big deal in terms of spacing. Thats an equivalent of 2.5mm out in each hole, so that might mean them being loose. But if you win the auction, drilling holes isnt exactly hard.. just make sure you avoid the wires
Posted: Mon Jul 31, 2006 7:53 pm
by Arnoldo
kk.....Cheers m8

Posted: Mon Jul 31, 2006 8:01 pm
by ModifiedMadness
I thought the speakers in the 6N2 were 6 1/2 inches
If they were 16cm they'd be about 6.30 inches
Posted: Mon Jul 31, 2006 8:06 pm
by MaxZ
they're 16cms but they're classified as 3.5 inches if you have a look at the 3.5 inch speakers half of them are 16, some are 17 and some are 16.5 need to make sure before you buy them
Posted: Mon Jul 31, 2006 8:15 pm
by Arnoldo
If they are out......What exactly do I need to do?
Posted: Mon Jul 31, 2006 8:18 pm
by MaxZ
the easiest thing would be to get the adaptors
Posted: Mon Jul 31, 2006 8:21 pm
by Arnoldo
Link me m8

Posted: Mon Jul 31, 2006 8:24 pm
by MaxZ
Adaptors
or if you really want to improve your ride how about an induction kit?

Posted: Mon Jul 31, 2006 8:28 pm
by Arnoldo
lol ur such a wee seller
Im goin to get the BMC one in the very near future m8 after my rims

Posted: Mon Jul 31, 2006 8:29 pm
by MaxZ
i thought they only did the BMC for the GTi.. would have got that instead of the K&N