Page 1 of 1
mk4 dash removal
Posted: Tue Aug 29, 2006 10:46 pm
by Dub1
anyone done this? found a polo at my local scrapyard, want the dash but not sure how to remove it
Posted: Wed Aug 30, 2006 5:45 pm
by willriseley
remove all attached bits
remove all visible fixings
then pull it till its either pops out or breaks
problem solved!
Posted: Wed Aug 30, 2006 5:46 pm
by Dub1
anyone? im in urgent need of some knowhow
thanks
Posted: Wed Aug 30, 2006 5:57 pm
by dragon_green
haynes manual.
Posted: Wed Aug 30, 2006 6:08 pm
by Dub1
nothing in there, every little bit about & around the dash, but not actually the dash itself
Posted: Wed Aug 30, 2006 8:57 pm
by warrmr
Dub1 wrote:nothing in there, every little bit about & around the dash, but not actually the dash itself
i think theres 2 bolts in the engine bay under the scuttle pannel by the ECU and in the opposit corner.
and 2 more bolts on opposit sides in the footwells.
and one in teh center console the rest of it is just clipped on try unbolting all those first then give it a tug if it doesnt come free see where it sticks and you will find more bolts if any.
Posted: Thu Aug 31, 2006 5:23 pm
by dragon_green
Dub1 wrote:nothing in there, every little bit about & around the dash, but not actually the dash itself
that sucks a bit!