Page 1 of 2
FG cover for install almost finished...
Posted: Fri Sep 08, 2006 8:48 pm
by ICEYPOLO
thought i'd just post a couple of nearly finished pics, did all this to have it in the car for e38 show and then didnt get it back in time... jus gotta get the pin holes filled and wet n dry to 800 grade then matt black i reckon!
will probably only have the car for another month or so but i'm proud of my first FG atttempt!
scott
Posted: Fri Sep 08, 2006 10:53 pm
by ModifiedMadness
You selling up then Scott?
What you got in mind?
Posted: Fri Sep 08, 2006 11:05 pm
by Dee-vub
good attempt mate, looks smart!
Would have been cool if you had posted up a step by step for complete noobs like me.
Posted: Fri Sep 08, 2006 11:27 pm
by Biddle
You gonna finish and sell it with the car, or you gunna sell it seperate as a semi-completed install? Looks cool.
Posted: Fri Sep 08, 2006 11:31 pm
by Dee-vub
sell the install seperately, im havin first dibs on it
Posted: Fri Sep 08, 2006 11:40 pm
by Biddle
Haha beat me to it
Posted: Sat Sep 09, 2006 9:50 am
by Dee-vub
haha sorry mate. Would be too good an oppertunity to miss out on if it were ever to arise!
Posted: Sat Sep 09, 2006 9:51 am
by ICEYPOLO
ModifiedMadness wrote:You selling up then Scott?
What you got in mind?
yeah i've got people asking about the car and havent even advertised it!
i'm after a corrado vr6, quite a few out there that are in excellent condition and they sound beautiful
have seen a golf vr6 on e38 which is tempting me as well...
i'll be finishing the install hopefully for the polo show but then i will be taking it out, i'm not selling the equipment as its taken me a few years to build up about £2.5k worth of gear!!
the install 'skin' and moulded side panels etc will be up for sale tho, dunno if someone could make use of them!?
scott
Posted: Sat Sep 09, 2006 9:57 am
by Dee-vub
yeh thats the main part i would be interested in mate. the fibreglass skin. you would obviously have to let me know the size of the sub and dimensions of the amp etc so i can basicly replicate the install so it all fits in nicely!
keep me in mind bud, i'll be at the polo show, so i'll have a word with you about it there.
Good luck with it!
Posted: Sat Sep 09, 2006 10:02 am
by ICEYPOLO
no worries,
its a JL 8W7 sub which is a real heavyweight without taking up too much space, will also take a lot more power through it than most 10" subs!
you may be able to get another 8" sub to fit altho for the right offer i might sell the sub and custom box with the FG skin. Any amp that is slightly bigger than the cut out can be made to fit and look tidy...
scott
Posted: Sat Sep 09, 2006 10:37 am
by Tigz
Rather have a XXX
Looks good though mate, what size is the box?
Have you used the spare wheel well also?
Posted: Sat Sep 09, 2006 10:46 am
by ICEYPOLO
W7 jus look so meaty tho!!
box is 0.875 cuft if my memory serves me right!?
have used the wheel well to house the 2nd deep cycle battery and then put a false floor on support struts over that.
scott
Posted: Sat Sep 09, 2006 10:57 am
by Tigz
Have you tried the W7 ported?
Sounds amazing.
Posted: Sat Sep 09, 2006 11:01 am
by ICEYPOLO
i've always used sealed designs, partly due to having small cars and because i like the bass punchy...
when i get the corrado i might try a slot port design as i'll have loads more room to play with, have been toying with the idea of 2 x 8W7's in that as the audison amp puts out 900wrms @1 ohm easily!
what are you running in yours?
scott
Posted: Sat Sep 09, 2006 11:51 am
by ModifiedMadness
The new XXX is a beast though Scott
http://www.caraudiodirect.co.uk/product ... ts_id=4968
Not too sure what sizes will be available but they'll take a good 3-4k RMS
