Page 1 of 1
Induction Kits for the Polo 9N
Posted: Tue Nov 04, 2003 12:12 am
by andyl
Does any1 know if there are any induction kits out for the new polo and does any1 know how to fit them?
Posted: Tue Nov 04, 2003 1:24 am
by mole
Don't think there are any "kits" as such, but you can easily make your own up by buying a K&N cone and a bit of pipe for example.
The only thing that has stopped me fitting one is the fact that the filter would be right on top of the engine, drawing in hot air..... I think relocating the filter to somewhere where there's plenty of cold air would be an idea.... but where?!
Hope this helps,
Mole
Posted: Tue Nov 04, 2003 11:21 am
by andyl
There is a ledge on the left hand side, near the belt as you look at the front on the car so it may fit on there, but i have already put airhorns down there so im not sure if there is enough space left now.
Posted: Thu Nov 06, 2003 4:43 am
by vwpower
there is enough space
the only problem is finding the induction kit that fit. Is what I`m working on.
THIS IS WHAT mole is talkink about
Unitl now it really have work having it on that place And at the same time agree with mole
Posted: Mon Nov 10, 2003 1:39 am
by Scorpio1
A standard K+N wouldn't be the one to go for on the 9N because no matter where you put it it will draw in warm air from somewhere.
A better soulution would be getting a 2nd generation kit that has a box for the K+N cone or getting a Viper kit, they're meant to be really good.
.
The link is
here
Posted: Wed Nov 12, 2003 11:54 pm
by polomk6
wot about for diesels?