Page 1 of 1
Alloys
Posted: Sun Sep 24, 2006 9:22 pm
by Biddy17
Im sure you members are fed up with people asking these questions now, but is:-
# Tyre: 195 x 50 x 15
# PCD: 4x100/4x108
# Offset: 38mm
A decent sizE? No problems fitting them?
Posted: Sun Sep 24, 2006 10:13 pm
by R1CH
is it a mk4. They need to be 4x100 instaed of 4x108. The tyre size and offset should be fine though.
Posted: Mon Sep 25, 2006 11:39 am
by polopowah
yup apart from 4x108 is an Audi fit and the 50 profile will cause problems if you lower it so stick to 40/45 profile.
-Ben-
Posted: Mon Sep 25, 2006 9:46 pm
by Biddy17
if i got them 50 instead of 45 how low could i go before it caused problems?
Posted: Tue Sep 26, 2006 5:01 pm
by polopowah
roughly -40/50mm
also depends what size the alloys are.
-Ben-