Page 1 of 1
lowering 6n 100mm
Posted: Thu Nov 02, 2006 6:59 am
by polo57
i plan to lower my 6n polo 100mm on coilovers with 14's , the only problem is i have heard rumours about the camber and that been severly out when its sitting that low, do i need to get a longer top wish bone? will the drive shaft pop out?
any help would be good.
cheers
Posted: Fri Nov 03, 2006 5:35 pm
by willriseley
this is mine bud.its down 120mm allround on steels.the front camber is a bit excessive but it looks kinda cool.havnt popped the shafts yet and hope i dont.only probs i get are grounding out on the chassis,wishbones,sump,exhaust and everything under the car.basically the pan is on the floor.
Posted: Fri Nov 03, 2006 5:43 pm
by polo57
nice and low! yeah i think 100mm will do, will give me nearly an inch more clearance on the standard wheels.