Page 1 of 2
How Low Do You GO
Posted: Thu Nov 09, 2006 10:18 am
by Kronix
Im considering lowering my Polo when i get it by 60mm Front n back. Will it effect my driving , or should i be safe and drop to 40mm - but I do want to achieve a nice low polo
Cheers
Posted: Thu Nov 09, 2006 10:39 am
by danny_boy
it all depends on the size of your wheels really bud. a 60mm drop shud be fine on say 15's or 16's. ive got 16s an i first lowered it 40mm an it looked crap lol so i went out an got a coilover kit an its now about 80mm
Posted: Thu Nov 09, 2006 1:59 pm
by h4r1s
Definately go for a 60mm drop, only time you hit on bumps is when you got 4 people in the car
Posted: Thu Nov 09, 2006 4:24 pm
by mysteryboy
-60mm drop deffo...
You'll get the odd high ass bump that you'll hit but it's all part of the fun
Posted: Thu Nov 09, 2006 5:52 pm
by Arnoldo
Two things :
1.Would I be able to get 60mm Springs and Shocks for mine making it sit nice on my 15" wheels. Pics of my car are posted in my Update thread.
2.Were would I get a nice cheap set of 60mm or 40mm springs and shocks and would it be worth the extra money to just get coilovers?
Cheers
Posted: Thu Nov 09, 2006 6:59 pm
by danny_boy
coilovers are handy since you can adjust your car the the perfect height you want easily. but shocks an springs are gona cost you about half as much but if you dont like it and want it heigher or lower then ur buggered really lol. Thers a guy on clublupo selling really cheap kits (£160 i think) id go have a butchers on ther!
Posted: Fri Nov 10, 2006 3:30 pm
by Arnoldo
What 80mm like m8 with ur coilovers? Easy enough with the ramps? Coilovers handling any better than springs?
Posted: Fri Nov 10, 2006 3:43 pm
by danny_boy
yea ramps and big speed bumps tend to give me abit of a hard time
and bumpy roads tend to make me look like im head bangin to sum proper hardcore tunes! but yea def go for the shocks and springs if you can coz if you jus fit the lowering springs by themselves the ride will be very springy and the handling will be poo and you will wear your shocks out!
Posted: Sun Nov 12, 2006 8:01 pm
by Alex_6n2
I'm at least 100mm down (If my guess is correct more like 120) and it's still very drivable. Only thing is when I need to traverse BIG speed bumps, a run up is KEY
Posted: Sun Nov 12, 2006 11:00 pm
by Dee-vub
go get a pic up of the stance alex.....120mm sounds a bit optomistic in a 6n2 like......maybe not, but wouldnt mind seein it.
Posted: Sun Nov 12, 2006 11:51 pm
by Alex_6n2
KW coilies are hard enough to go down that low.
My subframe is what, 20-25mm off the floor, with 30mm of thread left on my KWs
Posted: Thu Nov 16, 2006 11:33 am
by djsimmy
ive seen pics of alex's on clup polo looks about 110mm ish...
Posted: Thu Nov 16, 2006 11:33 am
by djsimmy
im gonna be 120mm when i get the grinder out
Posted: Thu Nov 16, 2006 5:24 pm
by Alex_6n2
You only saw the one when it was on 50 profile tyres though?
MUCH lower than that now
Posted: Thu Nov 16, 2006 6:29 pm
by Bepe
this was mine when i dropped mine haha, it was whown down all the way:
