Page 1 of 1
ref alloys
Posted: Sun Dec 10, 2006 2:03 pm
by tinny22
i am buying some alloys for my vw polo w reg. can anybody help me what is the pcd. the alloys are 4 stud pcd 100 15in will they fit my car it would be a big help
thanks tinny22
Posted: Sun Dec 10, 2006 2:22 pm
by Si_GTi
The alloys you describe will fit just fine as long as the offset is suitable.
PCD, or
Pitch
Circle
Diameter, is the diameter of a circle drawn through the center of your wheel's bolt holes. PCD is measured in millimetres and also indicates the number of studs or bolts the wheel will have. So for you, your Polo has 4 studs with a PCD of 100mm, hence the fitment 4x100.
Posted: Sun Dec 10, 2006 2:23 pm
by DanDiesel
4x100 PCD is fine and 15inch is a decent size and i think the offset u will need is around ET38!
ref alloys
Posted: Tue Dec 12, 2006 9:52 am
by tinny22
i have been told there the ET is 45 will they fit thanks for the help
tinny22
Posted: Tue Dec 12, 2006 6:10 pm
by Alex_6n2
They'll look a bit hidden under your arches but spacers will sort that right out.