UK-POLOS.NET - THE VW Polo Forum

im looking to get alloys to suit the euro style im going for

ive found these steffan BCW's they look handsome but im not sure about sizes and offset etc.
ive got a mk4 polo (6n)
the spec: 7x14's et24 4x100

im looking for 14's so these are what i want but im confused about the offset et24 and 4x100 can someone explain... will these fit and will i have any trouble when i lower my car. im looking to lower the car on 60mm springs maybe even 80mm HELP ANYONE PLEASE

bflower59947 wrote:im looking to get alloys to suit the euro style im going for

ive found these steffan BCW's they look handsome but im not sure about sizes and offset etc.
ive got a mk4 polo (6n)
the spec: 7x14's et24 4x100

im looking for 14's so these are what i want but im confused about the offset et24 and 4x100 can someone explain... will these fit and will i have any trouble when i lower my car. im looking to lower the car on 60mm springs maybe even 80mm HELP ANYONE PLEASE

first off, the 4x100 is the stud pattern and is the right one for your polo. the offset (et24) is basically how far they stick out, standard 6n2 offset is 38 and im guessin 6n is the same??? anyway the lower the offset, the more they will stick out. you should be allright with et24 on that drop im guessin, a stretch on the tyres and a bit of arch rolling will be a good idea tho then u can get a bit lower probly
hope that helps!

basicly they will fit mate... i dont quite know about the pcd (4x100) but the offset is about right,,,,