Page 1 of 2

Got Bored Today !

Posted: Wed Feb 14, 2007 5:44 pm
by Ian_R
Image
Image

Posted: Wed Feb 14, 2007 7:00 pm
by Alex_6n2
Good lad!

Non of this "Power Drums" crap.

Hammerite?

Posted: Wed Feb 14, 2007 7:02 pm
by Ian_R
Alex_6n2 wrote:Good lad!

Non of this "Power Drums" crap.

Hammerite?
Power Drums ? Nah Mate, Good Old Halfords Spray Paint, Few Coats of Primer, Same with the Black, and Also The Laquer 8) Gonna throw it on 4 Stands 2 tomorrow and Jet wash the Arches, Also maybe Wind The Coils to The Bottom, As you can see in the Pic there's A Way to go lol

Posted: Wed Feb 14, 2007 7:24 pm
by Bepe
this is what mine did look like:

Image

I never got round to taking a pic of the finished thing, only did one side as it took ages sanding it down and getting all the rust off! :lol:

Posted: Wed Feb 14, 2007 7:41 pm
by Ian_R
Sod Proper Sanding Down lol, I just attacked mine with the Old Wire Brush lol, You do you'rs Black Yeah ?

Posted: Wed Feb 14, 2007 7:41 pm
by Ian_R
Sod Proper Sanding Down lol, I just attacked mine with the Old Wire Brush lol, You do you'rs Black Yeah ?

Posted: Wed Feb 14, 2007 10:15 pm
by Alex_6n2
Should've used Hammerite mate, better than paint for brakes etc.

Posted: Wed Feb 14, 2007 11:14 pm
by Dee-vub
Alex_6n2 wrote:Should've used Hammerite mate, better than paint for brakes etc.
He should be ok with the drums due to it not generating that much temp, but with calipers etc, get the hammerite out.

The normal paint still wont last as long though on the drums!

Posted: Thu Feb 15, 2007 4:43 pm
by Bepe
did mine silver mate

Posted: Thu Feb 15, 2007 5:43 pm
by pip_polo
i did mine red, i used this stuff from motor world, he said that hammerite wouldn't last as long, cost me 20 squid. looks good though. (mk4 though :twisted: )
Image

Posted: Thu Feb 15, 2007 7:21 pm
by Alex_6n2
Oh dear.

Red drums look s**t.

Posted: Fri Feb 16, 2007 9:48 am
by Dee-vub
You dont want to drag attention to a set of drums. Get them black and hidden! :)

Posted: Fri Feb 16, 2007 12:42 pm
by Arnoldo
Goin to get mine calipiers down within the week. What I need to do them? Sand them etc?

Posted: Fri Feb 16, 2007 12:48 pm
by Ian_R
Arnoldo wrote:Goin to get mine calipiers down within the week. What I need to do them? Sand them etc?
Well As Stated, If your Doing the Callipers, Then you'll need hi Temp Paint, ie Hammerite, All i done for the drums, was Wire brush them Down, and A Couple of coats of Primer, Then Black Pain, Then the Laquer, I know at some point i'll have to do them again, but better than looking rusty,

Also Keeping them subtle is the way forward i say! Rather than red etc, No offence to anyother person that has done this, just i dont like things over the top on vag cars, Euro Way always !

Posted: Fri Feb 16, 2007 1:09 pm
by Arnoldo
I thought u just sprayed the hammerite on just after u wire brushed them?