Page 1 of 1
Golf 25th Anniverdary Sill Protectors..
Posted: Sat Feb 17, 2007 6:38 pm
by D-Dub
Will they go straight on? Or do they need modifiying. Pics of them on a polo would be great
Posted: Sat Feb 17, 2007 6:44 pm
by ModifiedMadness
They need trimming to the shape you can see in the 2nd pic mate. Just make yourself a carboard template then go from there.
Sorry I haven't explained it in detail, I can't really think how to type it.
It is a really straight forward job though.
Posted: Sat Feb 17, 2007 7:36 pm
by Mouse_GTI
Those black bits come with the sill?
Posted: Sat Feb 17, 2007 7:51 pm
by ModifiedMadness
Yep, what you see there is what you get
(after being cut down of course)
Posted: Sun Feb 18, 2007 11:16 am
by Vena_GTi
D-Dub...I have recently put these sill protectors on... im rubbish at all this diy stuff but all i did was make sure i had them aligned dead in the middle of the door and as far back to the rubber as possible and they went on a treat without having to cut them... its ok on our cars because they are black so if there a little out its not as noticable as the guys with red and silver
Posted: Sun Feb 18, 2007 12:57 pm
by D-Dub
Ah so there one piece things? I thought you just got the metal things and you stuck them on
Posted: Sun Feb 18, 2007 4:34 pm
by ModifiedMadness
D-Dub wrote:Ah so there one piece things? I thought you just got the metal things and you stuck them on
It's all vinyl mate, no metal at all
Posted: Mon Feb 19, 2007 1:57 pm
by Tigz
I didnt get the black bit with mine.
Just the silver strip.
Gutted.
Posted: Mon Feb 19, 2007 8:13 pm
by ModifiedMadness
They should look the same as mine (just not that shape as they've been cut to size)
Posted: Mon Feb 19, 2007 10:58 pm
by Tigz
lol sorry, got them out the shed.
They are the same!
Posted: Tue Feb 20, 2007 4:15 pm
by ModifiedMadness
That's good then.
Get them on