Page 1 of 1
280MM brembo discs
Posted: Mon Feb 19, 2007 9:15 pm
by 1 GTI
I've got 256MM brembo discs now, but im looking for 280MM brembo ones. I've had a price off GSF just wondering if anybody know anywhere cheaper? GSF have quoted me £25+VAT per disc. I think thats a reasonable price, but if I can cheaper I will. Im doing the 280MM brake conversion, would standard 280MM discs do or go for brembo grooved ones? I want to get as much stopping power as I can. I wouldn't mind doing the 312MM conversion but im not changing my wheels to 16's. I hope 280MM discs will do. Cheers
Posted: Mon Feb 19, 2007 9:19 pm
by oscar olop gti
Ive just fitted 280mm brake (standard G60 ones) & they are do the job just fine.
Posted: Mon Feb 19, 2007 9:21 pm
by 1 GTI
Is there much of an improvement or just a small noticeable difference?
Posted: Mon Feb 19, 2007 9:26 pm
by oscar olop gti
Still bedding them in but i can feel the difference over the standard discs.
Posted: Mon Feb 19, 2007 9:31 pm
by 1 GTI
Did you put the G60 calipers on or leave the GTI ones? Sorry for all the questions
Posted: Mon Feb 19, 2007 9:41 pm
by ticki
I left the the standard GTi callipers on, and yes there is a very noticeable difference. feels like what it should of been. But it wont take the air out of your lungs if thats what your looking for.
Here mine with Black Diamond disks and pads
Posted: Mon Feb 19, 2007 9:44 pm
by 1 GTI
Thanks for that mate. Want to GIVE me your nice shiny BBS wheels? Hehe. Mine have just started to bubble.
Posted: Mon Feb 19, 2007 9:53 pm
by ticki
1 GTI wrote:Thanks for that mate. Want to GIVE me your nice shiny BBS wheels? Hehe. Mine have just started to bubble.
LOL
Posted: Mon Feb 19, 2007 10:00 pm
by oscar olop gti
Standard calipers as they are the same, just got some carriers & painted them red, look ok but need to clean & touch up all my calipers. (was more of a necessity to get the brake on than a luxury of brakes on & paint the calipers at the same time).
Posted: Mon Feb 19, 2007 10:09 pm
by Redline
I had my carriers bead blasted and powder coated when I got them.
Luckily I had to time to clean my calipers when I was fitting the 280's so they're all nice and clean now. Look great behind the 16's.
Posted: Wed Feb 21, 2007 11:12 am
by way_z
Redline wrote:I had my carriers bead blasted and powder coated when I got them.
Luckily I had to time to clean my calipers when I was fitting the 280's so they're all nice and clean now. Look great behind the 16's.
how much did bead blasting and powder coating your callipers cost you? I wanna do this too but only one place near me that'll do it so i wanna know a rough price as to haggle with them abit!
p.s. any chance of pics of the powder coated callipers??
Posted: Wed Feb 21, 2007 1:36 pm
by Redline
In terms of price, I'm lucky enough to know someone through my Father who does all the powder coating work for his company, so I didn't pay anything to have the carriers done! Off the top of my head I think a ballpark figure of £50 was mentioned.
But that was only for the carriers, I didn't have the calipers themselves powder coated as they were in pretty good condition. I'll get some pics of how they look later anyway.