Page 1 of 1
Wax/Polish aftermath!
Posted: Sun Apr 15, 2007 4:13 pm
by Tiger
My paintwork is metalic black, and every time I polish/wax the car I get this dreaded white clinging aftermath dust from the polish, its driving me around the bend! Any ideas?

Posted: Sun Apr 15, 2007 6:49 pm
by mc_iver_9n
Polish harder and over it again possibly
Posted: Sun Apr 15, 2007 6:54 pm
by Ollie_R
What polish are you using?
If it's something like Autoglym SRP, you're using too much. A 10p-sized amount of polish is enough to do one panel.
Also, you could always use a bit of Meguiars Quick Detailing spray, spray onto the recently polished surface and wipe the excess off.
Posted: Thu Apr 19, 2007 9:20 pm
by danthemanpologti
if its a dust i sugest wipin over with a microfiber cloth!!!
Posted: Sun Apr 22, 2007 9:55 pm
by freakyeke
When you run out of the Autoglym, get yourself some P21S. Stunning stuff. Cost about £20 from Clean and shiny
http://www.cleanandshiny.co.uk/ProductD ... uctID=9100
I have a full container of Autoglym SRP in my shed.
I stopped using it when I discovered Meguiars #26 Hi tech yellow wax and I stopped using that when I discovered P21S
