Page 1 of 2

FK Coilies

Posted: Mon Apr 16, 2007 3:24 pm
by Omz_6N2
Ello everyone

I have the FK Highsport coilovers on my 6N2. Couple of problems with it if anyone can help

1. The front suspension seems to be clonking/pinging when i turn at slow speeds (Do you think this could be due to the top mounts being to tight ? if that makes sence)

2. The back suspension seems to be stuck (Seized i think) i tried to raise the ride height, adjusting the front was a piece of pi**, both rings easily released, however on the rear the two coil/rings seem to be jammed together, ive put some copper grease and a whole load of WD40 on them but they still seemed to be stuck.

Can anyone help with the above ?

Re: FK Coilies

Posted: Mon Apr 16, 2007 6:15 pm
by Arnoldo
Omz_6N2 wrote:Ello everyone
1. The front suspension seems to be clonking/pinging when i turn at slow speeds (Do you think this could be due to the top mounts being to tight ? if that makes sence)
Get this one my springs and shocks too. Take no notice of it really lol.

Posted: Mon Apr 16, 2007 8:03 pm
by Bepe
Nothing wrong with them mate, my FK Highsports does it aswell mate ;) 8)

Posted: Mon Apr 16, 2007 8:05 pm
by Bepe
oh and i think for the back suspension question is because of your anti roll bar, mine was a bastard to raise aswell mate, anyway why the raising? you want to be slamming! 8) :lol:

Posted: Mon Apr 16, 2007 8:20 pm
by Arnoldo
Bepe. U ever get that pic of ur car shocks? And u know what the clunking noise is?

Posted: Mon Apr 16, 2007 9:09 pm
by Bepe
what do you mean mate? and i cant exactly rem what the clunking noise is, nothing to worry about though!

Posted: Mon Apr 16, 2007 11:10 pm
by MaxZ
a mate of mine got the same clunking noise on his coilies and he was told it was the anti roll bar that cracked, only like 40 quid to replace

Posted: Tue Apr 17, 2007 9:32 am
by Omz_6N2
Mate my cars soooooooo low at the mo its crazy + ive had to take my new rims off to accomadate the "lowerage" lol. What do you mean the anti roll bar ?? you have to understand im still a novice on a learning curb :?

Posted: Tue Apr 17, 2007 12:54 pm
by MaxZ
spoken to him today and it was actually anti roll bar bush that cracked, which looks like this ..
Image
its what the anti roll bar is mounted on and if it's cracking it's a very common fault

Posted: Tue Apr 17, 2007 1:00 pm
by Omz_6N2
By replacing these do you no if the Pinging/Clonking sound stopped ?

Posted: Tue Apr 17, 2007 4:13 pm
by Bepe
no it wont stop the anti roll bar does exactly what it says on the tin, stops your car rolling :P but your clonking noise must of been alot louder then that coz most clonking from fk highsports is at the front when turning at slow speeds!

Posted: Tue Apr 17, 2007 5:01 pm
by Omz_6N2
Ite cheers for your help chaps. Im going to take the rears completely off and try and adjust them and as for the noise at least i no its not just me. Before i kept thinking the coilies are going to snap so i went really really slow but now Pedal to the Medal :P

Cheers again.

Posted: Tue Apr 17, 2007 7:34 pm
by Arnoldo
Location ? Sry to ask such a noobie question but I dont have a clue lol. My car has terrible body roll for 60mm lowering springs. Is there anyway of makin it stiffer? The kit in question is philj's.

Posted: Tue Apr 17, 2007 7:46 pm
by Bepe
iam not to hooked up on the philj kits but normally they are stiff :shock: but on coilovers you can normally get dammper adjustable ones but on the highsports there is not, all i can say mate is buy coilovers then you are cruising round like a go kart! 8)

Posted: Tue Apr 17, 2007 10:00 pm
by MaxZ
i can definitely say that it fixed the clonking noise for my mate, don't know if it will help you people. It wasnt the anti roll bar but the bush that it sits on