Page 1 of 1

RH CUP

Posted: Mon May 21, 2007 6:33 pm
by grant hunter
JUST ORDERED A SET OF BLACK CENTRED RH CUP WHEELS IN 16 BY 7.5!! CANT WAIT BUT AM s**t IT INCASE THEY DONT FIT?? AM SURE THE ET IS 38?? CAN ANYONE PHOTO SHOP THESE ON TO A BLACK COILOVERED POLO

Posted: Mon May 21, 2007 7:25 pm
by M7
5x100 et38 will be fine

Posted: Tue May 22, 2007 5:23 pm
by grant hunter
et 35 sorry!! that still fine??

Posted: Tue May 22, 2007 5:35 pm
by M7
yes, 35 is also fine. just means its 3mm further away from the hub

Posted: Tue May 22, 2007 6:54 pm
by grant hunter
god knows what they will look like when on?? al get pics up asap (end of the week??next week maybe)

Posted: Tue May 22, 2007 8:26 pm
by david burton
as long as you run 205 width tyres you should be fine, 215s will be a squeeze.

I run 7.5 inch wide wheels at 32 offset and they're fine 8)

Posted: Tue May 22, 2007 10:01 pm
by grant hunter
was going to go for the sretched look but am trying to find out abit more before a get the tyres ordered!!

Posted: Tue May 22, 2007 10:11 pm
by M7
you'l need somthing like a 165 or a 185 to stretch on a 7.5

Posted: Tue May 22, 2007 10:25 pm
by grant hunter
a asked on ed38 but didnt get a very good response!!! a use the car a good bit so a want them to last an such like!! dont no if its easy to put the tyre on the wheel with it being streched??was going go 185/40/16

Posted: Tue May 22, 2007 10:52 pm
by david burton
185s will give you a little stretch. 7.5" is about 190mm so this will definitely stretch but it won't be ridiculous.

often if a wheel is 7.5" wide it'll actually be wider than that in reality.

Posted: Tue May 22, 2007 11:50 pm
by steve__30
stick with 205 tyres, will look much nicer with fat tyres, yeh im runnin et32 aswel and its fine :)

Posted: Wed May 23, 2007 5:51 pm
by grant hunter
got a badgless grill today!! so am just waiting on my wheels to come an then al order tyres!! am a wee bit scared of the strech but al see when a get the wheels

Posted: Sun Jun 17, 2007 3:08 pm
by grant hunter
got my wheels and ordered 185/40/16

but the guy said he tryed to fit them but he thinks the wheels are 17" is this right or will a just tell him to try and the will go on??

a defo orderd 16"

Posted: Sun Jun 17, 2007 4:18 pm
by M7
i dont think anyone on here can help you with that one :?
get a tape measure out

Posted: Sun Jun 17, 2007 10:26 pm
by grant hunter
he said they were 17" a bought them brand new from dubmeister and 16" was the size a paid for. ow well they got measured and they are 17" god knows? going in to get painted and a few bits done on tuesday night so al try and start a progress thread