Page 1 of 1
Alloys will they fit?
Posted: Sun Jun 03, 2007 8:00 pm
by bouzel
Will these alloys fit on my car: TSW
Rim Width: 6J
Rim Diameter: 15 inches
Stud: 4 Stud
I know the picture shows 5 stud but there definatly four this si the closest picture i could find to them if anyone could do a photoshop aswell that would be greatly appreciated.... Many thanks...
Posted: Sun Jun 03, 2007 9:42 pm
by Bepe
make sure the pcd fitment is 4x100 mate, and the bore is 57.6 iirc, if someone can correct me?
Posted: Sun Jun 03, 2007 10:03 pm
by Bryony84
57.1 is vw centerbore isn't it?
Posted: Sun Jun 03, 2007 11:21 pm
by dubpilot
^^^ correct! 57.1mm centrebore, 4x100 pcd, make sure your offset doesnt go bigger than 35 if they are aftermarket wheels and wider than 6.5J otherwise you risk hitting your suspension.
Posted: Mon Jun 04, 2007 12:36 am
by Arnoldo
mine are 7j :S
Posted: Mon Jun 04, 2007 7:56 am
by Bepe
he is onabout the offset mate, not the width, 7j is fine, thats what i have!
Posted: Mon Jun 04, 2007 5:57 pm
by bouzel
looks like i might have to put the alloys on hold.... post above
Posted: Mon Jun 04, 2007 7:33 pm
by Arnoldo
Bepe is ur car lowered at all with ur alloys?
Posted: Mon Jun 04, 2007 8:20 pm
by Bepe
yep about 100mm, atm, have had it down about 110mm but its to low LMAO, can get pics if you like mate
Posted: Mon Jun 04, 2007 11:03 pm
by Arnoldo
Pics are needed. Mine is scrubbin my arches to the death. The tyres are goodyear eagle f1's size 195/50/R15 . Just lookin to knw what size of tyres u are runnin and if I got 195/45/R15 would this stop the scrubbing.
Cheers
Posted: Tue Jun 05, 2007 8:08 am
by Bepe
no, it wouldnt stop the scrubbin mate, i have 165/50/15 tyres on mine mate, thats why iam able to go so low, try going for 175/40/15 and get your arches rolled, i will show you pics later mate
Posted: Tue Jun 05, 2007 4:53 pm
by Bepe
