16v Compression Test
Posted: Wed Jul 04, 2007 8:29 pm
Hi guys
I recently went to look at a polo 6n 16v. When we ran a compression test the meter read only 130psi, this seems a bit low. I've tried to find out what the readings should be without much luck, just wondering if anyone happens to know what it should be or what their valvers are running at.
Thanks
Nick
I recently went to look at a polo 6n 16v. When we ran a compression test the meter read only 130psi, this seems a bit low. I've tried to find out what the readings should be without much luck, just wondering if anyone happens to know what it should be or what their valvers are running at.
Thanks
Nick