Page 1 of 1
Alarm help *hazard light*
Posted: Thu Jul 19, 2007 5:17 pm
by s-l-i-x
Hi, I've fitted an alarm on my polo and its works fine apart from we dont know where the hazard light output is on the car?.....
Does anyone here know? Cheers

Posted: Thu Jul 19, 2007 7:23 pm
by PD
When i fitted my Remote locking kit it had two wires for the flashers, one goes off to the left side lights and the other goes to the right indicatiors. you should be able to find those cables in the loom in the front i connected mine directly onto the wires in the boot going into the rear lights.
dont know if this helps.
you best bet is getting a haynes manual and looking at the wiring diagrams.
Posted: Thu Jul 19, 2007 8:18 pm
by s-l-i-x
Ok might just run a cable to the rear lights, thanks for that
Posted: Thu Jul 19, 2007 9:13 pm
by PD
s-l-i-x wrote:Ok might just run a cable to the rear lights, thanks for that
well the loom runs to the front of the car, not quite sure where you can find the cables.
I think you can possibly connect the cables onto the hazard light switch.
Posted: Thu Jul 19, 2007 9:49 pm
by alexperkins
Indicator wires are Black/White and Black/Green in the big loom under the dash!

Posted: Thu Jul 19, 2007 10:34 pm
by s-l-i-x
Ok thanks PD & Alex
