Page 1 of 1
Head Swap
Posted: Fri Jan 09, 2004 11:09 am
by jaymz
Here is the problem. I have a 1993 (MkIII?) Polo Fox Coupe 1043cc which looks like it may have a cracked head. I also have a 1989 (MkII?) Polo C 1043cc with a good engine. Does anyone know if the head can be taken out of the '89 Polo C and put into the '93 Polo without major modifications?
Posted: Fri Jan 09, 2004 3:18 pm
by mk2matt
if they are both hydro lumps there will be no problems at all.
but if 1 is mechanical and the othe hydro not a very good idea as you will kill you car..
hope that helps you
head swap
Posted: Fri Jan 09, 2004 3:47 pm
by jaymz
excuse my ignorance here but what do you mean by both being hydro lumps?
Posted: Fri Jan 09, 2004 3:57 pm
by mk2matt
hydrolic tappets.
wot sort of cam cover do they have as if they both have 3 bolts your ok, thats a hydro lump
head swap
Posted: Fri Jan 09, 2004 4:03 pm
by jaymz
I get you now. I know the older one has 3 bolts but I can't remember about the newer one. Hopefully it will be the same.
Thanks for your help.
Posted: Fri Jan 09, 2004 4:19 pm
by mk2matt
its no problem mate im always willing to help a fellow polo owner. like im doing all this weekend, stripping 1 polo and rebuilding another with my mate dispy(mk1)pete
if the older 1 has the 3 bolts on the rocker cover you have no problems then as the new will have too.