Page 1 of 1

Painting and Removing Rocker Cover

Posted: Sun Aug 19, 2007 3:44 pm
by Arnoldo
Ok the gf is away on holidays this week so I have some free time on my hands :D Goin to re-spray my rocker cover but need some help and tips. Is there a tuturial that someone has made or used before that could help out. What paint is best to be used. Want it to be red and I knw it has to be heat proof ;) Also is it easy to take off without any special tools as I had a quick look and it seems theres sensors and what not goin into it :o

Any helpful tips are Welcomed :)

Posted: Sun Aug 19, 2007 9:14 pm
by Mike_M
What engine size as the 1.4 and 1.6 16v engines are not cam covers but hold the cams so in short it would be like doing a cam belt change to get the cam carrier/cover off.

Posted: Mon Aug 20, 2007 6:52 pm
by Arnoldo
1.4 16v DOHC. Is it a big job for a beginner?

Posted: Mon Aug 20, 2007 8:12 pm
by alexperkins
Its all in the haynes manual - not too difficult, tho the tensioning can be fun!

Posted: Mon Aug 20, 2007 9:06 pm
by Arnoldo
I have the manual here and all m8 but it looks quick easy fooked up. U done it before?