UK-POLOS.NET - THE VW Polo Forum

Posted: **Mon Aug 27, 2007 8:48 pm**

would 16's , 7j width, offset 38 and stud diameter 114 fit my 6n? and what tyres would i need? maybe gonna drop 40mm too, would there be any rubbing? Cheers guys!

Posted: **Mon Aug 27, 2007 8:59 pm**

you need 4x100 PCD, not 114 if that's what you mean.....

Posted: **Mon Aug 27, 2007 9:54 pm**

yeh i think so, pcd is the same as stud diameter as far as i know? This is all the info i have

so they won't fit no?

Posted: **Mon Aug 27, 2007 11:31 pm**

Also, could anyone tell me if these would fit: http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=020 seem as though they'd need a bit of a refurb but could look nice!

Posted: **Tue Aug 28, 2007 12:11 am**

Can't see any reason why they wouldn't fit.

4x100 fitment, and 38 offset so yup they should be fine.

Only thing is the 205/50/15 tyres, as that's quite a big size. 195/45/15 would be more suitable.

Posted: **Tue Aug 28, 2007 4:28 pm**

Thanks alot guys, really appreciate your help! I won the wheels in the end

so would the 205/50/15 tyres be no good at all? As they need two new tyres, it would be cheaper to just buy two of those opposed to four 195/45/15s? How much am i looking at for a new set of tyres btw... sorry i don't know much about this :s

Posted: **Wed Aug 29, 2007 10:01 am**

if you want to lower the car, get 4 195x45x15 tyres.....

if you want to spend less then get the 205s, but your speedo will be out, your acceleration will be slower and the tyres might rub!

Posted: **Wed Aug 29, 2007 10:58 am**

Ah ok thanks David, so 195/45/15's won't disrupt my speedo reading?

UK-POLOS.NET - THE VW Polo Forum

Alloy help!!! Need reply ASAP PLEASE!!!

Alloy help!!! Need reply ASAP PLEASE!!!