Page 1 of 1
Replacement of the temperature sensor for the 16v
Posted: Sun Sep 02, 2007 10:04 am
by chunkychimpanzee
Hello everyone,
My 6n 16v temperature sensor need a replacement. The problem is, I dont know where is it located under the bonnet. Anyone of you can give me some valuable advises?? And what else I have to be aware of when I replace the sensor? Many thanks in advance for you advise and support. Cheers
Samuel
Posted: Sun Sep 02, 2007 1:07 pm
by twistedl
I have a working temp sender as I replaced mine and didnt need to, I think the temp sender is near the intake manifold, all you need to do is pull the clip off and put some rag near it as it will p*** out tons of coolant.
Wack the new 1 in put the clip back on, fill it up with coolant and off you go. It suprized me how easy it was to do. Ill have a look at my car at some point and tell you exactly where it is
Posted: Sun Sep 02, 2007 7:00 pm
by chunkychimpanzee
twistedl wrote:I have a working temp sender as I replaced mine and didnt need to, I think the temp sender is near the intake manifold, all you need to do is pull the clip off and put some rag near it as it will p*** out tons of coolant.
Wack the new 1 in put the clip back on, fill it up with coolant and off you go. It suprized me how easy it was to do. Ill have a look at my car at some point and tell you exactly where it is
Thanks a lot.. If you have some photo to show me would be great.. Sorry for asking too much as I dont want to mess up anything...
Many thanks in advance.
Cheers