UK-POLOS.NET - THE VW Polo Forum

Need help......

Just went to fit my Xenons and havent a clue where to start??? Cant see what I am removing from my lights the now that will make my xenons fit in! Thinkin the kit i have got is s**t. it is H7 fitting.

You only need to take the halogen bulbs out, and put in the xenon ones. And then find a place to fix the balasts.

If a take the normal bulb out the am left with the bulb holder and the two wires goin in to it. But me xenon bulb has no where to connect into this, plus ave got them black/red wires there????

The black and red wires connect to the plug where the previous bulb plugged in to - red to yellow and black to brown

You will need to cut a hole in the dust cover for the headlamp to put the wiring through - its rather simple to do.

Did you not get any instructions with the kit kenny?

I can email you a fitting guide from mine if you wish (theyre all the same, just rebranded)

And get that bulb covered up - you dont want anything getting on it

The instructions are p***, just one diagram. My email is : [email protected]

ok, the bulb holder that is in just now has two black wires goin into it. A cant disconnect them or there will be now power to the bulb. I cant honestly see how this all ties up which makes me think ave got a rubbish kit. Theres no way new bulbs are gonna fit in my head light unit, it needs to be screwed in.

Oh ye i just saw. Im sorry to say that isnt an H7 bulb - H7s have a metal mount on them.

Best advice is take them back, and order a set of H7s of www.hids4u.co.uk with code ASTRA. If you are wanting 8000k ones, just specify with your order.

They will never be able to fit, as theres nothing to clamp on to

Bastard!!!! Need to take them back now. Wee prick! Gonna get sum off hid4u cheers m8