UK-POLOS.NET - THE VW Polo Forum

i got some weitec 40mm springs for my polo 6n2/mk5 1.4 mpi. it has lowered at the front but hasn't done anything at the back of the car. and it has been like this for about a month so the springs have had enough time to settle. does anybody know why this is or how to solve it.
please help thanks. i have put a picture below so you can see what i meen (if it has worked).
[/URL][/img]

There ya go mate.

Wierd how it hasn't dropped at all on the back

yeh i no, it has really annoyed me after you spend the money to do it. any ideas of what i can do

that is really strange. umm.. Did you put the right springs on the front and back? i.e put the front on the back and the back on the front?

Mate! send them straight back, ive seen this somewhere that they have sent the wrong ones, trust me, get on phone to them now!

yeh i definetley put the correct springs on,100% sure about that. i sent them an e-mail and they asked for a code on the spring if any of you know what they mean about that? i bought them from DPM Autostyling and i think they are a good company,but would they accept the springs being taken back and also it costs me money to take springs off and on!!!

Well you're going to have to pay and get them taken off as they're obviously wrong.

As for the code, there should be a part number printed somewhere on the spring itself. If you send them that, they will be able to check what they are and whether, as it seems, they're the wrong ones.

Should also be some kind of product code on the box they came in I would think.

right thanks for that. i am going to check tommorow and give them a ring and see whats happening. i will post back to elt you know whats happened. thanks guys